 |
 |
 |
|
|
|
[Sponsors] | ||||
February 2, 2010, 06:41
|
Stepped Spillway
|
#1 |
|
Member
Mohammad Sarfaraz
Join Date: Feb 2010
Posts: 35
Rep Power: 16  |
Hi
I want to model a stepped spillway in FLOW-3D. Has any one done this before? or does any one have a thesis about this? |
|
|
|
|
|
February 2, 2010, 09:25
|
|
#2 |
|
Senior Member
michael barkhudarov
Join Date: Mar 2009
Location: Sante Fe, New Mexico, USA
Posts: 336
Rep Power: 18 |
It was done at the Hydrology Institute in St Petersburg, Russia, http://www.eng.rushydro.ru/, and presented at a seminar last June. Don't have a reference for the materials themselves, sorry
|
|
|
|
|
|
|
February 2, 2010, 12:05
|
|
#3 |
|
Member
Armen A. Ghirghidov
Join Date: Mar 2009
Posts: 50
Rep Power: 17 |
Hi there. I did that. What do you want to know? I am going to make another simulation in couple days.
BTW. Mike I believe I left that materials somewhere in Internet. I could look through where they are or leave them again. Regards, Armen. |
|
|
|
|
|
|
February 4, 2010, 01:08
|
|
#4 |
|
Member
Mohammad Sarfaraz
Join Date: Feb 2010
Posts: 35
Rep Power: 16 |
Hi
I was wondering if you could possibly send me the "STL" files and report (containing boundary conditions,...) |
|
|
|
|
|
|
February 4, 2010, 03:47
|
|
#5 |
|
Member
Armen A. Ghirghidov
Join Date: Mar 2009
Posts: 50
Rep Power: 17 |
Hi there. Sorry I can't That's copyrighted spillway and it is not published yet. I just can send you my preliminary simulation. The spillway has simple steps 5x5m. Boundary were very simple, just use water heights at right and left BC.
|
|
|
|
|
|
|
November 17, 2010, 18:14
|
|
#6 |
|
New Member
fh
Join Date: Sep 2010
Posts: 8
Rep Power: 15 |
hi
i recently saw your messege, i like to know if you could model a stepped spillway in flow 3d and if yes i would be grateful if you could direct me in this regard. thanks |
|
|
|
|
|
|
November 18, 2010, 04:29
|
|
#7 |
|
Member
Armen A. Ghirghidov
Join Date: Mar 2009
Posts: 50
Rep Power: 17 |
Dear fth.
I used spillway with 5x5m steps. There is about 40 steps. so if you need just simulate spillway you will need about 5 cells per step but if you need more information (k and у parameters etc.) you will need about 15 ceels per step. For example I calculated that spillway about 20 days with 5 cells per step on Core 2 Duo. The same spillway with 15 cells is simulating about 30 days on Core-i7 (it's about 4-5 times faster) and it's quite far from the end. :-( Many things depends on you computer. About BC I wrote above. Regards, Ghirghidov |
|
|
|
|
|
|
November 18, 2010, 07:56
|
Stepped Spillway
|
#8 |
|
Member
Mohammad Sarfaraz
Join Date: Feb 2010
Posts: 35
Rep Power: 16 |
Hi there
As I read Ghirghidov's message, I think that a stepped spillway with the 5m height of the steps, is not a real case! The maximum height of steps that has been constraucted is 1.2m. I have modeled a stepped spillway which the height of the steps is 1.2 m, the slope fo the spillway is 1.2V:1.0H and the height of the spillway is 82.0m, both physical and numerical. The numerical modelling was done by FLOW-3D. After all the numerical results agree very well with the physical modelling results. |
|
|
|
|
|
|
November 18, 2010, 08:25
|
|
#9 |
|
Member
Armen A. Ghirghidov
Join Date: Mar 2009
Posts: 50
Rep Power: 17 |
Dear Mohammad Sarfaraz.
I'm sorry I was not right. there are steps 1.5x1.5 etc. Actually that spillway contains steps with different configurations - several 0.5x0.5 one about 5 (or 6) and others 1.5x1.5. Regards, Ghirghidov. |
|
|
|
|
|
|
November 18, 2010, 10:15
|
Tech paper
|
#10 | |
|
Member
Daniel
Join Date: Sep 2010
Location: the Netherlands
Posts: 44
Rep Power: 15 |
Quote:
I hope it helps, http://www.flow3d.com/pdfs/tp/wat_en...i-Bib33-10.pdf |
||
|
|
|
||
|
June 12, 2011, 14:31
|
|
#11 | |
|
New Member
Azam Dolatshah
Join Date: Jun 2011
Posts: 2
Rep Power: 0 |
Quote:
would you please send me your perpin file to khow how i set the condtions? i want to khow what the mistake is that the simulation doesn't do well (the water jumpe over the steps actually in my simulations) thanks A. Dolatshah |
||
|
|
|
||
|
June 14, 2011, 06:14
|
|
#12 |
|
Member
Armen A. Ghirghidov
Join Date: Mar 2009
Posts: 50
Rep Power: 17 |
Dear Azam Dolatshah,
send you to where? Regards. |
|
|
|
|
|
|
June 15, 2011, 07:13
|
|
#13 | |
|
New Member
Azam Dolatshah
Join Date: Jun 2011
Posts: 2
Rep Power: 0 |
Quote:
Hi Dear Armen please send it to this e-mail adress : matilda_wkb@yahoo.com or matilda.wkb@gmail.com i'm very glad for your kindness, thank you very very much... best regards |
||
|
|
|
||
|
July 6, 2011, 01:32
|
Article
|
#14 |
|
Member
Mohammad Sarfaraz
Join Date: Feb 2010
Posts: 35
Rep Power: 16 |
I have found this article useful, modeling stepped spillway with FLOW-3D.
https://rapidshare.com/files/2753917293/Sarfaraz.pdf |
|
|
|
|
|
|
July 6, 2013, 10:51
|
input file
|
#15 | |
|
New Member
ali pourali
Join Date: Jul 2013
Posts: 1
Rep Power: 0 |
Quote:
this file is available in flow-3d user's site but i can't access that for log in password problem |
||
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Materials / Tutorials for simulating flow over spillway | basud0817 | FLOW-3D | 4 | August 25, 2015 04:39 |
| fluent using for spillway | heidari,m | FLUENT | 4 | July 22, 2011 01:44 |
| Flow Over a Spillway | Nicopep | OpenFOAM | 1 | October 21, 2009 04:48 |
| Spillway modelling: doubt about dimension | arsatan80 | FLOW-3D | 1 | August 5, 2009 11:00 |
| Spillway symulation | Ghirghidov | FLOW-3D | 3 | May 15, 2009 09:33 |
Linear Mode
