CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLOW-3D (http://www.cfd-online.com/Forums/flow-3d/)
-   -   F-Packing Function (http://www.cfd-online.com/Forums/flow-3d/72422-f-packing-function.html)

ck5285 February 5, 2010 03:39

F-Packing Function
 
All would like to know if anyone did compare results between Default f-packing vs Reduce surface breakup in extreme cases? Is the 2nd option run slower due to additional surface treatment needed to prevent breakup of fluid?

MuxaB February 10, 2010 10:35

Quote:

Originally Posted by ck5285 (Post 245034)
All would like to know if anyone did compare results between Default f-packing vs Reduce surface breakup in extreme cases? Is the 2nd option run slower due to additional surface treatment needed to prevent breakup of fluid?

The difference in speed between different F-packing options is minimal. I doubt it will even be noticeable. The difference in the results depends on the type of problem and in many case is also minimal. I would recommend sticking to the default setting.

ck5285 February 10, 2010 20:51

Hi Michael, thanks for clarification. :)


All times are GMT -4. The time now is 15:30.