CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLOW-3D (http://www.cfd-online.com/Forums/flow-3d/)
-   -   Fluent multiphase (http://www.cfd-online.com/Forums/flow-3d/73267-fluent-multiphase.html)

sm.ensmp March 3, 2010 09:18

Fluent multiphase
 
Hi,
I am modelling an a microchannel evaporator. I know that i have two phases but i dont know the flow pattern if it is bubbly flow or droplet flow.
So based on an article i chose the air as the primary phase and the water as the secondary one.
I tried the opposite case and i had different resultats.
I used the eulerian model per phase, K-E standard.
Can u help me to know on which bases we choose the primary and the secondary phase.

Thank you

ignatz March 3, 2010 11:38

By the title of your post, it seems you might be in the wrong forum?

sm.ensmp March 3, 2010 12:16

What forum is more suitable??
i posted it also in ansys fluent

thx anyways

ignatz March 3, 2010 13:22

I'm guessing you'll get more useful help in the Fluent forum for a Fluent-oriented question. If, instead, you are modeling with FLOW-3D, you should say so.


All times are GMT -4. The time now is 17:53.