|
[Sponsors] |
March 10, 2010, 16:52 |
STL viewer for Flow 3D
|
#1 |
New Member
aimin
Join Date: Mar 2010
Posts: 3
Rep Power: 16 |
dear flow 3D experts:
there is one STL viewer under Utilities menu for Flow 3D 9.3R, we could use it to open all the .stl example files under flow3D/v9.3/GUI/STL_LIB directory; but we can NOT use it open .stl files exported from Solidworks and UG please kindly advise what should I do? |
|
March 11, 2010, 10:45 |
|
#2 |
New Member
aimin
Join Date: Mar 2010
Posts: 3
Rep Power: 16 |
dear flow 3D experts:
there is one STL viewer under Utilities menu for Flow 3D 9.3R, we could use it to open all the .stl example files under flow3D/v9.3/GUI/STL_LIB directory; but we can NOT use it open .stl files exported from Solidworks and UG please kindly advise what should I do? enclosed below is very simple .stl file for square block which I exported from Solidworks, could you let me know why could not I open this file in STL viewer(FLOW VU) of Flow 3D 9.3R? what is wrong for this .stl file? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Using STL Data with ICEM CFD/AI-Environment | Shawn Givler | ANSYS Meshing & Geometry | 18 | March 11, 2019 13:03 |
[surface handling] How to make boundary patches in STL file | nzy102 | OpenFOAM Meshing & Mesh Conversion | 4 | January 22, 2018 15:03 |
[Netgen] Netgen mesh settings for STL geometries | lucchini | OpenFOAM Meshing & Mesh Conversion | 3 | March 7, 2011 01:02 |
[snappyHexMesh] SnappyHexMesh meshes inside and outside of an STL geometry | villier | OpenFOAM Meshing & Mesh Conversion | 17 | June 15, 2010 19:51 |
Importing and cleaning STL files | Peter | FLUENT | 2 | October 13, 2006 05:41 |