A big problem about scour around pile

Ghirghidov · November 29, 2010, 03:53

Dear mohammad

What actually you want to add into F3D?

Regards.

mamadnamaie · November 30, 2010, 03:19

hello.packed sediment concentration. should i gain it from experiment. i have a flume with 30 cm sediment into it

river80 · February 4, 2011, 04:07

Hi dear Ghirghidov
i have a question
in initial, you input 991 for sediment concentration
how you calculate it?
Many thanks and best regards,
Hosain

Ghirghidov · February 4, 2011, 08:19

Dear Hosai.

I used it from the example. IMHO you could use 100 or 1000 does not matter.

Regards.

Ghirghidov · April 13, 2011, 05:37

Dear obama549.

The scouring rate depends on sediment tipe and discharge ond many other things.

Regards.

misle · February 23, 2012, 04:07

please e-mail to me.. prepin and stl.. misle@hotmail.co.kr

Regards.

hans_ina · April 9, 2012, 03:54

Quote:

Originally Posted by bojiezhang

hello everyone:
I have a big problem about scour around pile.The sand aroud the pile was scoured quickly by the water.I do not which parameter I set wrong or where I misset.Ask for help,thank you for advance!

Hi bojiezhang,

I have same problem too with F3D 9.2, think you can share the problem. i modeling scour around rectangular pile group.. but all sediment going up by wave.. i have limited the depth of sediment but unsatisfied result

meangreen · July 3, 2012, 16:53

Can someone email me the multiphase flow theory that is used in flow3d?

cqlamarche{at}gmail{dot}com

Thanks,

Casey

November 30, 2010, 03:19	hello	#22
mamadnamaie New Member mohammad Join Date: Mar 2010 Posts: 3 Rep Power: 5	hello.packed sediment concentration. should i gain it from experiment. i have a flume with 30 cm sediment into it

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13
Solver problem with a big amount of reactions	Leonid	CFX	2	April 9, 2007 10:38
I have a big problem of convergence, please help !	amel	FLUENT	3	February 15, 2007 15:32
ICEM meshing problem	Forrest	CFX	4	May 25, 2005 18:37
problem with using colocated code	Jack	Main CFD Forum	0	December 15, 2002 00:15

November 29, 2010, 03:53		#21
Ghirghidov Member Armen A. Ghirghidov Join Date: Mar 2009 Posts: 50 Rep Power: 6	Dear mohammad What actually you want to add into F3D? Regards.

February 4, 2011, 04:07		#23
river80 New Member hos Join Date: Apr 2010 Posts: 5 Rep Power: 5	Hi dear Ghirghidov i have a question in initial, you input 991 for sediment concentration how you calculate it? Many thanks and best regards, Hosain

February 4, 2011, 08:19		#24
Ghirghidov Member Armen A. Ghirghidov Join Date: Mar 2009 Posts: 50 Rep Power: 6	Dear Hosai. I used it from the example. IMHO you could use 100 or 1000 does not matter. Regards.

April 13, 2011, 05:37		#25
Ghirghidov Member Armen A. Ghirghidov Join Date: Mar 2009 Posts: 50 Rep Power: 6	Dear obama549. The scouring rate depends on sediment tipe and discharge ond many other things. Regards.

February 23, 2012, 04:07		#26
misle New Member Junsik Kim Join Date: Dec 2011 Posts: 1 Rep Power: 0	please e-mail to me.. prepin and stl.. misle@hotmail.co.kr Regards.

July 3, 2012, 16:53		#28
meangreen Member Casey Join Date: Jun 2009 Posts: 92 Rep Power: 5	Can someone email me the multiphase flow theory that is used in flow3d? cqlamarche{at}gmail{dot}com Thanks, Casey