CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLOW-3D (http://www.cfd-online.com/Forums/flow-3d/)
-   -   B.Cs (http://www.cfd-online.com/Forums/flow-3d/81090-b-cs.html)

jiko October 15, 2010 10:40

B.Cs
 
Hi. I have a case of extremely slow moving fluid for example x velocity =0.001m/s in this situation what type of boundary should I have on the downstream end. In case of outflow water seems to flow out . I already tried couple of options but the simulation dies within first few time-steps.

MuxaB October 23, 2010 15:09

Quote:

Originally Posted by jiko (Post 279376)
Hi. I have a case of extremely slow moving fluid for example x velocity =0.001m/s in this situation what type of boundary should I have on the downstream end. In case of outflow water seems to flow out . I already tried couple of options but the simulation dies within first few time-steps.

What kind of flow is it? is pressure mostly hydrostatic? Whould a pressure BC with the fluid height work?


All times are GMT -4. The time now is 19:01.