CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > FLOW-3D

forrtl: severe (174): SIGSEGV, segmentation fault occurred

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 3, 2010, 08:23
Default forrtl: severe (174): SIGSEGV, segmentation fault occurred
  #1
Member
 
Yang Yue
Join Date: Feb 2010
Location: Birmingham, UK
Posts: 36
Rep Power: 16
therockyy is on a distinguished road
Dear all,

Has anybody encountered this problem before? The entire message is :

p, li { white-space: pre-wrap; }
restart and spatial data available at t= 0.00000E+00
***
t cycle iter dtstbl/code delt vl epsi cpu clock
--- ----- ---- ----------- ---- -- ---- --- -----
0.00E+00 0 0 3.89E-04/st 3.89E-04 4.63E-10 -1.0E+00 1.3E+01 11:37:24
forrtl: severe (174): SIGSEGV, segmentation fault occurred
Image PC Routine Line Source
libpthread.so.0 000000307790C420 Unknown Unknown Unknown
hydr3d 00000000008D5947 Unknown Unknown Unknown
libguide.so 0000002A955BFD33 Unknown Unknown Unknown
forrtl: severe (174): SIGSEGV, segmentation fault occurred
Image PC Routine Line Source
libpthread.so.0 000000307790C420 Unknown Unknown Unknown
libpthread.so.0 000000307790C2BE Unknown Unknown Unknown
libguide.so 0000002A955C1941 Unknown Unknown Unknown
Abnormal exit from solver.




I've totally lost this time. It seems the error is related to some codes or the pressure boundary settings. Does someone know how to fix it?


Many thanks!


Yang

Last edited by therockyy; December 4, 2010 at 10:12.
therockyy is offline   Reply With Quote

Old   December 24, 2010, 22:06
Default
  #2
Senior Member
 
LT
Join Date: Dec 2010
Posts: 104
Rep Power: 15
NewKid is on a distinguished road
Have you figured this out?
I have encountered the almost same question.
NewKid is offline   Reply With Quote

Old   January 14, 2011, 07:08
Default
  #3
Member
 
Yang Yue
Join Date: Feb 2010
Location: Birmingham, UK
Posts: 36
Rep Power: 16
therockyy is on a distinguished road
Quote:
Originally Posted by NewKid View Post
Have you figured this out?
I have encountered the almost same question.
Actually, I haven't. But if you change the value of the pressure boundary, it could be fixed sometime. Good luck!

Yang
therockyy is offline   Reply With Quote

Old   January 17, 2011, 02:20
Default
  #4
Senior Member
 
michael barkhudarov
Join Date: Mar 2009
Location: Sante Fe, New Mexico, USA
Posts: 336
Rep Power: 18
MuxaB is on a distinguished road
Quote:
Originally Posted by therockyy View Post
Actually, I haven't. But if you change the value of the pressure boundary, it could be fixed sometime. Good luck!

Yang
What version of FLOW-3D are you running?
MuxaB is offline   Reply With Quote

Old   January 17, 2011, 07:36
Default
  #5
Member
 
Yang Yue
Join Date: Feb 2010
Location: Birmingham, UK
Posts: 36
Rep Power: 16
therockyy is on a distinguished road
Quote:
Originally Posted by MuxaB View Post
What version of FLOW-3D are you running?
I just checked that. I'm using version 9.4 64-lnx 2009.
therockyy is offline   Reply With Quote

Old   January 19, 2011, 01:43
Default
  #6
Senior Member
 
michael barkhudarov
Join Date: Mar 2009
Location: Sante Fe, New Mexico, USA
Posts: 336
Rep Power: 18
MuxaB is on a distinguished road
Quote:
Originally Posted by therockyy View Post
I just checked that. I'm using version 9.4 64-lnx 2009.
There have been two updates since then. The latest is 9.4.2. Can you try it?
MuxaB is offline   Reply With Quote

Old   January 19, 2011, 05:37
Default
  #7
Member
 
Yang Yue
Join Date: Feb 2010
Location: Birmingham, UK
Posts: 36
Rep Power: 16
therockyy is on a distinguished road
Quote:
Originally Posted by MuxaB View Post
There have been two updates since then. The latest is 9.4.2. Can you try it?

Thank you very much for all your replies. I'll ask our administrator update the software. By the way, is there main changes between V9.4 and V9.4.2?
therockyy is offline   Reply With Quote

Old   January 19, 2011, 23:52
Default
  #8
Senior Member
 
michael barkhudarov
Join Date: Mar 2009
Location: Sante Fe, New Mexico, USA
Posts: 336
Rep Power: 18
MuxaB is on a distinguished road
Quote:
Originally Posted by therockyy View Post
Thank you very much for all your replies. I'll ask our administrator update the software. By the way, is there main changes between V9.4 and V9.4.2?
The list of fixes comes with the update from the user site.
MuxaB is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Segmentation fault when running dieselFoam or dieselEngineFoam in parallel francesco OpenFOAM Bugs 4 May 2, 2017 22:59
[Netgen] Import netgen mesh to OpenFOAM hsieh OpenFOAM Meshing & Mesh Conversion 32 September 13, 2011 06:50
Debugging a segmentation fault? hansel OpenFOAM Bugs 3 July 31, 2010 14:13
ParaView segmentation fault only for multiphase gwierink OpenFOAM 9 March 25, 2010 08:23
Arrghh!!! segmentation fault occurred july Siemens 1 April 10, 2002 07:23


All times are GMT -4. The time now is 04:15.