CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLOW-3D (http://www.cfd-online.com/Forums/flow-3d/)
-   -   output (http://www.cfd-online.com/Forums/flow-3d/90171-output.html)

nadi July 3, 2011 06:40

output
 
dear all
I am a beginner.I am using flow-3d for simulating flow in a 90 degree bend and I dont know how to make output data in a line that have a angle like 15.

JBurnham July 5, 2011 15:44

Nadi - use a 'neutral file' to specify points at which you want the results. You will create a text file called transf.in that lists the points (and includes some other formatting), and then use Analyze > Neutral File Output tab to plot either the interpolated results or the cell-centered results for the cells that contain the points you've specified. See the online help manual and search it for transf.in or neutral file to find the format required.

nadi July 6, 2011 02:42

output
 
Quote:

Originally Posted by JBurnham (Post 314825)
Nadi - use a 'neutral file' to specify points at which you want the results. You will create a text file called transf.in that lists the points (and includes some other formatting), and then use Analyze > Neutral File Output tab to plot either the interpolated results or the cell-centered results for the cells that contain the points you've specified. See the online help manual and search it for transf.in or neutral file to find the format required.

dear JBurnham
thank you for your reply,I will try it.


All times are GMT -4. The time now is 05:31.