CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Fluent Multiphase

Upload of UDF file fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 25, 2013, 11:42
Default Upload of UDF file fluent
  #1
New Member
 
Uttam Singh
Join Date: Aug 2013
Posts: 1
Rep Power: 0
usrajput is on a distinguished road
Hi guys,
I could not able to upload th udf file in the Fluent (ansys-12) , there is an error message i.e

"open_udf_library : The system cannot find the file specified "

I have attached the error msg pic ,Please tell me how can i upload the udf file.
Attached Images
File Type: jpg error.jpg (43.8 KB, 16 views)
usrajput is offline   Reply With Quote

Old   March 18, 2014, 03:28
Default reservoir simulation
  #2
New Member
 
amit
Join Date: Mar 2014
Posts: 10
Rep Power: 3
akjha is on a distinguished road
i am trying to simulate a reservoir system with some mass in mass out. i have full mouth flow at inlet and outlet. i am going for a multiphase VOF model to see the air water interface in the model. I have following doubts:
1. do in need to go for open channel flow VOF model?
2. the reservoir is closed from the top, so do i need to give open to atmosphere BC at the top wall or wall boundary condition will do?
3. I have information about fixed mass flow rates at inlet and outlet, what kind of BC at inlet and outlet i can go for? currently i am going for massflow inlet and pressure outlet..
4. i am using air as secondary phase and water primary phase. is it correct?
akjha is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
wmake compiling new solver mksca OpenFOAM Programming & Development 13 August 18, 2014 22:26
which tutorial can find that include Riemann boundary condition? immortality OpenFOAM Running, Solving & CFD 12 May 3, 2013 18:21
1.7.x Environment Variables on Linux 10.04 rasma OpenFOAM Installation 9 July 30, 2010 04:43
BlockMesh FOAM warning gaottino OpenFOAM Native Meshers: blockMesh 7 July 19, 2010 14:11
error while compiling the USER Sub routine CFD user CFX 3 November 25, 2002 16:16


All times are GMT -4. The time now is 02:45.