CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Fluent Multiphase

two phase modeling

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 16, 2013, 07:13
Question two phase modeling
  #1
Member
 
mehdimoradi
Join Date: Jun 2013
Posts: 50
Rep Power: 4
mehdimoradi. is on a distinguished road
Hello
I am modeling a two phase problem. one phase is the air and other is grain bed. I need to calculate pressure and velocity distribution of air through the bed. Height of bed is 1 meter. although the grains is discharging with known mass flow rate from the bottom of bin. therefore air and grain are moving counter flow. my questions are:
1- Can I use two phase Eulerian model?
2- What type of B.C must be selected in out let of grain?
3-Is this problem assotiated with the porous media?
Thanks
mehdimoradi. is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
phase change modeling Danial Q Main CFD Forum 0 April 5, 2012 01:14
Discrete Phase Modeling (Pipe erosion) in OF 2.1.0 mecbe2002 OpenFOAM 3 February 2, 2012 02:17
UDF of "anisotropic phase function" in radiation modeling whiz Fluent UDF and Scheme Programming 0 September 1, 2009 03:26
compressible two phase flow in CFX4.4 youngan CFX 0 July 1, 2003 23:32
Discrete Phase Modeling Fred Kang FLUENT 3 October 18, 2000 10:23


All times are GMT -4. The time now is 00:08.