CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

how to set initial value

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 13, 2014, 04:41
Default how to set initial value
  #1
New Member
 
Christina Wahyu K
Join Date: Dec 2013
Location: Indonesia
Posts: 5
Rep Power: 12
ChisK47 is on a distinguished road
Send a message via Yahoo to ChisK47
dear all friends...

i simulate a fermentation proses in batch system. i want to input initial value of reactant. i use patch but if i check in volume integral, mass, the total mass in different with mass that i patch (i want to input).
please help me how to do it.
i will very gratefull if you can help me..
ChisK47 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Micro Scale Pore, icoFoam gooya_kabir OpenFOAM Running, Solving & CFD 2 November 2, 2013 14:58
pisoFoam - unstable pressure residual Industrial_CFD OpenFOAM Running, Solving & CFD 21 February 24, 2013 16:39
why divergence occures in these cases immortality OpenFOAM Running, Solving & CFD 2 January 25, 2013 11:21
Interfoam blows on parallel run danvica OpenFOAM Running, Solving & CFD 16 December 22, 2012 03:09
Unknown error sivakumar OpenFOAM Pre-Processing 9 September 9, 2008 13:53


All times are GMT -4. The time now is 08:58.