mixture model in slurry flow

badrusharon · March 21, 2014, 01:24

i am doing a simulation for slurry flow in pipelines..got stuck in between the setup module..in there i don't know how to give properties to the phases i'm using..ie, water and fly ash...can anybody help?

badrusharon · March 22, 2014, 02:03

in setup-materials- i selected water liquid as my first material from the fluent database, then my doubt is how can i input the fly ash properties, since it is not in fluent database

badrusharon · March 22, 2014, 02:04

anybody help please...

Ahmed Tamkin · April 3, 2014, 04:45

I'm looking for help for slurry flow as well, the attached links are what i came across. They might help you or atleast get you started.

http://wenku.baidu.com/view/b51ef307eff9aef8941e062f

http://www.linkedin.com/groups/Hello...04045651718144

Ahmed Tamkin · April 3, 2014, 04:50

Hi

To add another material just go to the materials tab, then click on fluid > create/edit and then on the right side of a new materials tab you'll see fluent database, click on it. Once it opens, double click on some random material there then >copy. Then open this material by double clicking it and edit it's properties however you want and change its name.
Hope it helps.

Regards

March 21, 2014, 01:24	mixture model in slurry flow	#1
badrusharon New Member sharon Join Date: Mar 2014 Posts: 3 Rep Power: 12	i am doing a simulation for slurry flow in pipelines..got stuck in between the setup module..in there i don't know how to give properties to the phases i'm using..ie, water and fly ash...can anybody help?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFX multiphase flow model	aximefu	CFX	24	February 17, 2018 05:35
multi fluid mixture model issue	rystokes	CFX	3	August 9, 2009 19:13
MULTIPHASE - FREE SURFACE & MIXTURE MODEL	Aris	FLUENT	3	April 28, 2009 11:46
UDF for the mixture model	khar nab	FLUENT	0	July 31, 2008 06:29
Baldwin-Lomax model in wall jet flow	K.S.Chang	Main CFD Forum	0	December 7, 2005 01:51

March 22, 2014, 02:03		#2
badrusharon New Member sharon Join Date: Mar 2014 Posts: 3 Rep Power: 12	in setup-materials- i selected water liquid as my first material from the fluent database, then my doubt is how can i input the fly ash properties, since it is not in fluent database

March 22, 2014, 02:04		#3
badrusharon New Member sharon Join Date: Mar 2014 Posts: 3 Rep Power: 12	anybody help please...

April 3, 2014, 04:45		#4
Ahmed Tamkin New Member Ahmed Tamkin Butt Join Date: Apr 2014 Posts: 4 Rep Power: 12	I'm looking for help for slurry flow as well, the attached links are what i came across. They might help you or atleast get you started. http://wenku.baidu.com/view/b51ef307eff9aef8941e062f http://www.linkedin.com/groups/Hello...04045651718144

April 3, 2014, 04:50		#5
Ahmed Tamkin New Member Ahmed Tamkin Butt Join Date: Apr 2014 Posts: 4 Rep Power: 12	Hi To add another material just go to the materials tab, then click on fluid > create/edit and then on the right side of a new materials tab you'll see fluent database, click on it. Once it opens, double click on some random material there then >copy. Then open this material by double clicking it and edit it's properties however you want and change its name. Hope it helps. Regards