CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Fluent Multiphase

pure melting of ice due to water at higher temp

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 2, 2014, 07:00
Default pure melting of ice due to water at higher temp
  #1
ABH
New Member
 
ATAL
Join Date: Apr 2014
Posts: 1
Rep Power: 0
ABH is on a distinguished road
I am trying to simulate pure melting of ice due to being in contact with water at higher temp. There is no flow of water. Both water and ice column are at rest. I am using all wall boundary condition at respective boundaries. I observed very rapid melting of ice at the interface and that too the melting was non uniform over the interface surface. In this case, I hope, the melting to be uniform. So I added interface boundary with wall and zero shear boundary condition. The melt rate is now very very low and it takes very very long time to give me any substantial melt rate. Kindly suggest some proper approach for the problem.

Thanks...
ABH is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
No liquid water exist in my Fuel Cell simulation fatchang FLUENT 13 March 19, 2014 08:28
static temperature is higher than total temp. in buoyancy problem amirbahador FLUENT 2 October 24, 2010 08:21
The static temperature is higher than total temp devy FLUENT 0 March 27, 2003 21:16
Terrible Mistake In Fluid Dynamics History Abhi Main CFD Forum 12 July 8, 2002 10:11
Damage to Sea Wall due storm water run off HELP!!! Robertson,W. Main CFD Forum 1 June 8, 2002 11:06


All times are GMT -4. The time now is 10:36.