|November 19, 2014, 21:47||
problem in simulation of velocity field using mixture model
Join Date: Oct 2014
Posts: 4Rep Power: 3
I am simulating a velocity field of a discharge from a pipe at the bottom of a lake in a 3d model. And this lake is of density stratification with high salinity and zero sediment concentration. But the discharge from the pipe has a low salinity and low sediment concentration.
After I used the mixture model to simulated the case of difference in density caused by salinity. I found that the variables fields( salinity, velocity, turbulent viscocity etc.) are different from those solved by single fluid method. (PS:scalar equation is used to solve the trasport of the salinity, and the density of fluid is defined using udf)
Does anynoe know why? Please share your knowlege! thank you!
if you need details about the case, please contact me!
|multiphase, stratification, velocity field difference|
|Thread||Thread Starter||Forum||Replies||Last Post|
|change velocity field||LM4112||OpenFOAM Running, Solving & CFD||12||February 5, 2014 12:56|
|The problem for velocity calculation using turbulent model in openfoam.||mscheng||OpenFOAM Running, Solving & CFD||6||September 10, 2013 08:35|
|Problem with time average tangential velocity in swirl flow.||lakhi||FLUENT||5||July 18, 2012 16:28|
|Problem with multiphase flow - mixture model||Mat22||FLUENT||2||October 27, 2010 03:07|
|Problem with rhoSimpleFoam||matteo_gautero||OpenFOAM Running, Solving & CFD||0||February 28, 2008 07:51|