CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

Continuity equation does not solve in the Simulation of nanoparticles using DDPM

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 11, 2016, 10:42
Default Continuity equation does not solve in the Simulation of nanoparticles using DDPM
  #1
New Member
 
Join Date: Feb 2016
Posts: 1
Rep Power: 0
Amthganna is on a distinguished road
I am using Fluent 15.0 for simulation of nonfluid flow through oil wellbore. The mesh was generated using ICEM 15.0, and its quality is very acceptable. However, as the nanoparticle tracked the residual of the continuity goes high (over 20). Please, can anyone have a solution for that problem?


Thank you
Amthganna is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
I didn't find continuity equation satisified in multiphase analyses...... sanjiiv FLUENT 0 May 11, 2016 02:56
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 07:27
solve the continuity equation openfoammaofnepo OpenFOAM 0 May 19, 2013 07:12
Source Term on Scalar Transport Equation - crashing simulation alessio.nz OpenFOAM 19 February 8, 2011 08:38
non linear continuity equation S.Venkat Main CFD Forum 0 May 30, 2000 08:43


All times are GMT -4. The time now is 13:20.