|
[Sponsors] |
July 15, 2016, 06:51 |
What boiling model parameters to choose
|
#1 |
New Member
Join Date: Oct 2015
Posts: 12
Rep Power: 10 |
Hello!
I am modelling in FLUENT a boiling flux through a vertical channel. I am using Eulerian model with RPI for boiling. My BCs are: velocity inlet (with a defined profile), pressure outlet and Wall (temperature). Temperature of vapor is fixed to saturation temperature. I have not find useful references about which boiling model parameters are better for this case. What would you recomend me to choose for Bubble Departure Diameter, Frequency of bubble departure, Nucleation Site Density and Area Influence coefficient? Any advice will be apreciated. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pro/E to ANSYS Parameterization Guide | Trues | ANSYS | 4 | April 18, 2018 05:52 |
Wrong flow in ratating domain problem | Sanyo | CFX | 17 | August 15, 2015 06:20 |
Problems when using Population balance model with Boiling model | luliqiang | FLUENT | 0 | May 28, 2013 05:22 |
how to model boiling process | wanghong | FLUENT | 2 | October 1, 2010 17:07 |
Turbulence model parameters | Vidya Raja | FLUENT | 2 | October 6, 2006 13:38 |