CFD Online Discussion Forums

CFD Online Discussion Forums (
-   Fluent Multiphase (
-   -   how to modeling evapourating in pipe flow? (

Joey April 28, 2005 02:02

how to modeling evapourating in pipe flow?
I have heard that fluent can not model evapourating.Is this true?if not ,help me please,thanks a lot

rom April 28, 2005 02:30

Re: how to modeling evapourating in pipe flow?
You can implement a model for evaporating with udf. You will need to write at least two equations for mass and heat transfer between you phases. Look at the tutorial "horizontal film boiling" at for more details.

good luck


Joey April 28, 2005 03:49

Re: how to modeling evapourating in pipe flow?
when evapourating happens,in pipe flow, the flow is two-phase flow. And i do not have username and password. Could send me some material to me ? Thanks a lot!


Mehdi Ghoddosy April 28, 2005 04:08

Re: how to modeling evapourating in pipe flow?
Dear joey I will send you the tuturial you need. contact me if you need case and sulotion files. Regards

Joey April 29, 2005 01:16

Re: how to modeling evapourating in pipe flow?
Dear Mehdi Ghoddosy, Thank you for your help! Since I have no experience of simulating evapourating in pipe flow, still I need the source file (boiling.c).Could you send the file to me?Thanks a lot!

Mehdi Ghoddosy April 30, 2005 00:23

Re: how to modeling evapourating in pipe flow?
Dear Joey:Sure, I will send it.(mesh + boiling.c)

Joey April 30, 2005 00:42

Re: how to modeling evapourating in pipe flow?
Thanks a lot!

techy May 11, 2009 10:11

Please Help
Please somebody give me that tutorial.
It will be a great help to me.
Email ID

God bless you all.

Acebobo September 13, 2009 20:01


yigitktu September 22, 2010 08:25

same problem
I want to simulate water evaporation from water pool. I need some information to simulate multhiphase flow. Could you send me tutorial if you have.
thanks alot.

DanielLai November 5, 2011 12:18

Dear Mehdi Ghoddosy,

i 'm an undergrad, i'm doing simulation of heat pipe for the evaporation zone for my FYP. So it include boiling. Kindly ask that could you email to me the boiling tutorial that you have receive previously?? i dun have the username and password for the fluent tutorial....

I 'm really in desperate stage. Appreciate alot for ur help!!! Thanks in advance if u can email to Thanks alot!!!:)

kumar_cfd January 17, 2012 11:27

hi...i do have a problem with evaporation , condensation...kindly send the tutorial to my mail id

imnull January 17, 2012 20:52

I need it as well gent!
pls email me the one to
thanx in advance

new-jaguar April 14, 2013 00:38

Dear Mehdi Ghoddosy,
can you send me (mesh file+c.file)of tutorial horizontal film boiling,plz

Mahboobe365 May 31, 2013 11:30

Dear all,
Can you send me the tutorial ?

process.abhi May 31, 2013 11:55

could you send me the file boiling.c
My email i.d. is

piopio December 9, 2013 08:28

could you also send me the file with this model
My email is
I'll be appreciate for it.

Zaktatir December 10, 2013 12:54

i won't comment this topic

rafacerq January 21, 2014 14:13


Can you send me the files too?


Elfaham January 22, 2014 04:04


I am really in a bad need for this tutorial.
Would you plea help me and send it to my e-mail.

Thanks in Advance


All times are GMT -4. The time now is 01:49.