how to modeling evapourating in pipe flow?
I have heard that fluent can not model evapourating.Is this true?if not ,help me please,thanks a lot
|
Re: how to modeling evapourating in pipe flow?
You can implement a model for evaporating with udf. You will need to write at least two equations for mass and heat transfer between you phases. Look at the tutorial "horizontal film boiling" at http://www.learningcfd.com/login/flu...ials/index.htm for more details.
good luck rom |
Re: how to modeling evapourating in pipe flow?
when evapourating happens,in pipe flow, the flow is two-phase flow. And i do not have username and password. Could send me some material to me ? Thanks a lot! wwwsailor@126.com
Joey |
Re: how to modeling evapourating in pipe flow?
Dear joey I will send you the tuturial you need. contact me if you need case and sulotion files. Regards
|
Re: how to modeling evapourating in pipe flow?
Dear Mehdi Ghoddosy, Thank you for your help! Since I have no experience of simulating evapourating in pipe flow, still I need the source file (boiling.c).Could you send the file to me?Thanks a lot!
|
Re: how to modeling evapourating in pipe flow?
Dear Joey:Sure, I will send it.(mesh + boiling.c)
|
Re: how to modeling evapourating in pipe flow?
Thanks a lot!
|
Please Help
Please somebody give me that tutorial.
It will be a great help to me. Email ID computational.fluids@gmail.com God bless you all. techy |
Me too--bobo1314@126.com.3X
|
same problem
I want to simulate water evaporation from water pool. I need some information to simulate multhiphase flow. Could you send me tutorial if you have.
thanks alot. yigitktu@hotmail.com |
Dear Mehdi Ghoddosy,
i 'm an undergrad, i'm doing simulation of heat pipe for the evaporation zone for my FYP. So it include boiling. Kindly ask that could you email to me the boiling tutorial that you have receive previously?? i dun have the username and password for the fluent tutorial.... . I 'm really in desperate stage. Appreciate alot for ur help!!! Thanks in advance if u can email to danieleylai@hotmail.com. Thanks alot!!!:) |
hi...i do have a problem with evaporation , condensation...kindly send the tutorial to my mail id here.senthil@gmail.com
|
|
Dear Mehdi Ghoddosy,
can you send me (mesh file+c.file)of tutorial horizontal film boiling,plz saeed0913@yahoo.com |
Dear all,
Can you send me the tutorial ? tue88654@temple.edu |
could you send me the file boiling.c
My email i.d. is process.abhi@gmail.com |
could you also send me the file with this model
My email is kopec.p@wp.pl I'll be appreciate for it. |
i won't comment this topic
|
|
Tutorial
Hello,
I am really in a bad need for this tutorial. Would you plea help me and send it to my e-mail. elfaham1@gmail.com Thanks in Advance Gasser |
Look at the dates, guys/girls. You are requesting a tutorial that is nine years old. You can better look in the Fluent help.
Furthermore, if you need a username and password to access files, and you don't have those, it has a reason: probably this is to protect the copyrights. If you obtaining these protected files from a different source, you are (in most countries) breaking copyright laws, and could be fined. |
udf and mesh
Hi, can you please send me the boiling.c and mesh files? I'm in desperate need for that.
My email is zhangxiaobinghust@gmail.com Many thanks! |
Can you send me the two files(mesh + boiling.c) as well? Thanks
my email is zhangxiaobinghust@gmail.com Quote:
|
hi all,can i also get the file(mesh+boiling.c). doing evaporation problem in fluent using udf. my mail id is manishat88@gmail.com. need some guidance.
|
Modelling flow boiling in fluent
Hey guys,
I have been trying to simulate flow boiling process of water in fluent. But I have been facing a lot of problems of convergence. The calculation runs smoothly (converges) until some time and when it encounters the vapor that has been formed, the momentum and continuity values start diverging. I have tried changing the mesh size and time-step. The problem with going for too low time step is that it will take years for the calculation to get completed and with a larger mesh size, visualization of the bubbles is not possible. Can anyone point out the problem and suggest a viable solution? |
Need the same help
Quote:
i have the same problem but with condensation... can someone send the tutorial to my mail id?: jeffassouke@gmail.com. Or can someone just post the link for this tutorial. |
Quote:
My mail id is : chachinmec92@gmail.com |
All times are GMT -4. The time now is 00:36. |