 |
 |
 |
|
|
|
[Sponsors] | ||||
use the message in macro DEFINE_PROFILE with parallel processor |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 7, 2022, 14:19
|
use the message in macro DEFINE_PROFILE with parallel processor
|
#1 |
|
New Member
ali
Join Date: Dec 2021
Posts: 4
Rep Power: 4  |
hello everybody. I have a problem with my UDF code.
when I need, for example, to show a message in console of fluent. Messages are displayed by the number of cores per iteration. so my UDF is. #include "udf.h" DEFINE_PROFILE(test,t,i) { real x[ND_ND]; real y; face_t f; begin_f_loop(f,t) { F_CENTROID(x,f,t); y = x[1]; F_PROFILE(f,t,i) = 20; } end_f_loop(f, t) # if RP_NODE Message("I am node number %d and my total area =\n"); #endif } Can someone help me?  for example in my console there are.... 50 1.2234e-03 8.8863e-08 8.6806e-08 3.9153e-06 1.6958e-05 0:00:02 150 I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = 51 1.2175e-03 8.5994e-08 8.4665e-08 3.8269e-06 1.6073e-05 0:00:02 149 I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = 52 1.1948e-03 8.5537e-08 8.4834e-08 3.7380e-06 1.5363e-05 0:00:01 148 I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = 53 1.1977e-03 8.2946e-08 8.2868e-08 3.6486e-06 1.4522e-05 0:00:01 147 I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = 54 1.1569e-03 8.2664e-08 8.3097e-08 3.5597e-06 1.3840e-05 0:00:01 146 I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = 55 1.1443e-03 8.0552e-08 8.1521e-08 3.4713e-06 1.3142e-05 0:00:01 145 I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = iter continuity x-velocity y-velocity k omega time/iter 56 1.1370e-03 7.9410e-08 8.0782e-08 3.3842e-06 1.2490e-05 0:00:29 144 I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = 57 1.1135e-03 7.7823e-08 7.9737e-08 3.2968e-06 1.1884e-05 0:00:23 143 I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = 58 1.0998e-03 7.6748e-08 7.8946e-08 3.2125e-06 1.1345e-05 0:00:19 142 I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = 59 1.0798e-03 7.5316e-08 7.7951e-08 3.1289e-06 1.0884e-05 0:00:15 141 I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = 60 1.0539e-03 7.4476e-08 7.7332e-08 3.0445e-06 1.0461e-05 0:00:12 140 I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = 61 1.0358e-03 7.2458e-08 7.5681e-08 2.9638e-06 9.9771e-06 0:00:09 139 I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = 62 1.0257e-03 7.1945e-08 7.5367e-08 2.8832e-06 9.5769e-06 0:00:07 138 I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = 63 1.0150e-03 6.9986e-08 7.3691e-08 2.8055e-06 9.1605e-06 0:00:06 137 I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = 64 1.0260e-03 6.9069e-08 7.2931e-08 2.7292e-06 8.7510e-06 0:00:05 136 I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 6283 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = I am node number 0 and my total area = 65 9.8946e-04 6.7944e-08 7.2016e-08 2.6519e-06 8.4356e-06 0:00:04 135 ! 65 solution is converged Flow time = 0.001s, time step = 1 999 more time steps |
|
|
|
|
|
May 11, 2022, 00:53
|
|
#2 |
|
Senior Member
Alexander
Join Date: Apr 2013
Posts: 2,363
Rep Power: 34 |
Code:
Message("I am node number %d and my total area =\n",myid);
__________________
best regards ****************************** press LIKE if this message was helpful |
|
|
|
|
|
|
May 11, 2022, 01:35
|
|
#3 | |
|
New Member
ali
Join Date: Dec 2021
Posts: 4
Rep Power: 4 |
Quote:
|
||
|
|
|
||
|
May 11, 2022, 02:08
|
|
#4 |
|
Senior Member
Alexander
Join Date: Apr 2013
Posts: 2,363
Rep Power: 34 |
Code:
#include "udf.h"
DEFINE_PROFILE(test,t,i)
{
real x[ND_ND];
real y;
int curr_ts;
face_t f;
begin_f_loop(f,t)
{
F_CENTROID(x,f,t);
y = x[1];
F_PROFILE(f,t,i) = 20;
}
end_f_loop(f, t)
curr_ts = N_TIME;
if (last_ts != curr_ts)
{
last_ts = curr_ts;
# if RP_NODE
Message("I am node number %d and my total area =\n");
#endif
}
}
__________________
best regards ****************************** press LIKE if this message was helpful |
|
|
|
|
|
|
| Tags |
| define_profile |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Boundary condition problem (Freestream) | KAYANO | OpenFOAM Running, Solving & CFD | 5 | June 1, 2021 05:57 |
| AMI speed performance | danny123 | OpenFOAM | 21 | October 24, 2020 04:13 |
| MPI run run fails of quadcore openfoam2.4 | Priya Somasundaran | OpenFOAM Running, Solving & CFD | 3 | January 25, 2016 08:50 |
| decomposePar -allRegions | stru | OpenFOAM Pre-Processing | 2 | August 25, 2015 03:58 |
| Superlinear speedup in OpenFOAM 13 | msrinath80 | OpenFOAM Running, Solving & CFD | 18 | March 3, 2015 05:36 |
2Likes
Linear Mode
