CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Fluent UDF and Scheme Programming

illegal use of this type as an expression

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 20, 2013, 11:27
Default illegal use of this type as an expression
  #1
New Member
 
Tajul
Join Date: Aug 2009
Posts: 27
Rep Power: 8
abir is on a distinguished road
Hi
I use fluent 6.2.16 and visual studio 2010 ultimate. My udf is not working well. When I want to hook my UDF it gives the following error.

..\..\src\january.c(126) : error C2275: 'real' : illegal use of this type as an expression
..\..\src\january.c(78) : see declaration of 'real'
..\..\src\january.c(126) : error C2146: syntax error : missing ';' before identifier 'UDRLXCOEFF'
..\..\src\january.c(126) : error C2065: 'UDRLXCOEFF' : undeclared identifier
..\..\src\january.c(127) : error C2065: 'UDRLXCOEFF' : undeclared identifier
..\..\src\january.c(131) : error C2143: syntax error : missing ';' before 'type'
..\..\src\january.c(132) : error C2275: 'real' : illegal use of this type as an expression
..\..\src\january.c(78) : see declaration of 'real'
..\..\src\january.c(132) : error C2146: syntax error : missing ';' before identifier 'sigma_square'
..\..\src\january.c(132) : error C2065: 'sigma_square' : undeclared identifier
..\..\src\january.c(133) : error C2065: 'sigma_square' : undeclared identifier
..\..\src\january.c(137) : error C2275: 'real' : illegal use of this type as an expression
..\..\src\january.c(78) : see declaration of 'real'
..\..\src\january.c(137) : error C2146: syntax error : missing ';' before identifier 'ambpress'
..\..\src\january.c(137) : error C2065: 'ambpress' : undeclared identifier
..\..\src\january.c(138) : error C2065: 'ambpress' : undeclared identifier
..\..\src\january.c(145) : error C2143: syntax error : missing ';' before 'type'
..\..\src\january.c(163) : error C2065: 'MeanFreePath' : undeclared identifier
..\..\src\january.c(163) : error C2065: 'sigma_square' : undeclared identifier
..\..\src\january.c(163) : error C2065: 'ambpress' : undeclared identifier
..\..\src\january.c(189) : error C2065: 'MeanFreePath' : undeclared identifier
..\..\src\january.c(216) : error C2065: 'UDRLXCOEFF' : undeclared identifier
..\..\src\january.c(216) : error C2065: 'UDRLXCOEFF' : undeclared identifier
Done.
Could any body help me? I need it very much.
My UDF is attached herewith.
Abir
tajul000@yahoo.com

Last edited by abir; February 22, 2013 at 06:46.
abir is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CGNS converters available mbeaudoin OpenFOAM Meshing & Mesh Conversion 125 July 1, 2015 21:09
Using starToFoam clo OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 33 September 26, 2012 04:04
turbulent jet simulation antonio_ing OpenFOAM Running, Solving & CFD 5 September 16, 2010 02:31
reconstructParMesh not working with an axisymetric case francesco OpenFOAM Bugs 4 May 8, 2009 05:49
RasInterFoam STRANGE RESULTS AT BOUNDARY kumar2 OpenFOAM Running, Solving & CFD 8 March 24, 2008 19:38


All times are GMT -4. The time now is 05:03.