 |
 |
 |
|
|
|
[Sponsors] | ||||
I want to Change Values in Existing UDF to Match my Model |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 12, 2013, 11:51
|
I want to Change Values in Existing UDF to Match my Model
|
#1 |
|
New Member
Mr. Mamkol
Join Date: Mar 2012
Posts: 4
Rep Power: 14  |
I am simulating Natural ventilation in Building , but having problem in changing values in UDF to suit my own simulation. I attached a UDF that I got from a friend and I want to change the velocity to suit my own model. Please which values will I change and at what height should I measure the velocity? If I change the velocity will that affect the other three equations in the UDF? How did the writer arrived at 3.3*uf*uf in equation 2. The UDF is attached and waiting forward for you reply. Thank you
Last edited by mamkol; April 13, 2013 at 11:43. |
|
|
|
|
|
April 26, 2013, 02:57
|
|
#2 |
|
Senior Member
Paritosh Vasava
Join Date: Oct 2012
Location: Lappeenranta, Finland
Posts: 732
Rep Power: 22 |
There is not UDF attached here.
|
|
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Modified k-e turbulence model UDF | Travis | Fluent UDF and Scheme Programming | 7 | November 11, 2018 20:21 |
| UDF to change heat transfer coefficient with wall temperature | emmkell | Fluent UDF and Scheme Programming | 18 | August 7, 2018 03:44 |
| How to access only one phase in multiphase model by UDF | wersoe | Fluent UDF and Scheme Programming | 1 | January 4, 2017 07:11 |
| Radiation interface | hinca | CFX | 15 | January 26, 2014 17:11 |
| UDF of Zimont model in fluent | Z | Main CFD Forum | 0 | February 17, 2005 03:07 |
Linear Mode
