CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent UDF and Scheme Programming

UDF for Back-flow Temperature

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 20, 2013, 12:40
Default UDF for Back-flow Temperature
  #1
New Member
 
Join Date: Aug 2013
Posts: 10
Rep Power: 12
G340 is on a distinguished road
UDF for Back-flow Temperature
hi
I'm working on a fluent project and I wrote a UDF and after some iterations it have below error :

"temperature limited to 1.000000e+000 in 2203 cells on zone 2 in domain 1

absolute pressure limited to 1.000000e+000 in 659 cells on zone 2

turbulent viscosity limited to viscosity ratio of 1.000000e+005 in 30 cells
663 2.9455e+02 6.5109e-02 1.5233e-01 2.6984e-02 1.8058e-01 7.9374e-01 3.3443e-01 12:18:57 99916

reversed flow in 20 faces on pressure-outlet 7.

reversed flow in 2 faces on pressure-outlet 8.
temperature limited to 1.000000e+000 in 2871 cells on zone 2 in domain 1
temperature limited to 5.000000e+003 in 321 cells on zone 2 in domain 1

absolute pressure limited to 1.000000e+000 in 563 cells on zone 2

turbulent viscosity limited to viscosity ratio of 1.000000e+005 in 209 cells
664 1.0579e+04 1.2639e-01 2.4408e-01 4.8204e-02 7.2285e+01 9.1977e-01 1.0723e+03 15:24:12 99915

reversed flow in 20 faces on pressure-outlet 7.

reversed flow in 7 faces on pressure-outlet 8.
temperature limited to 1.000000e+000 in 3562 cells on zone 2 in domain 1
temperature limited to 5.000000e+003 in 537 cells on zone 2 in domain 1

absolute pressure limited to 1.000000e+000 in 589 cells on zone 2

turbulent viscosity limited to viscosity ratio of 1.000000e+005 in 287 cells
665 1.6978e+04 1.1723e-01 1.2709e-01 6.4955e-02 1.2789e+01 7.9988e-01 1.1797e+00 12:19:21 99914

reversed flow in 20 faces on pressure-outlet 7.

reversed flow in 9 faces on pressure-outlet 8.
temperature limited to 1.000000e+000 in 7932 cells on zone 2 in domain 1
temperature limited to 5.000000e+003 in 13 cells on zone 2 in domain 1

absolute pressure limited to 1.000000e+000 in 231 cells on zone 2

turbulent viscosity limited to viscosity ratio of 1.000000e+005 in 2432 cells
666 3.7511e+04 5.1764e-02 1.3114e-01 1.1729e-01 1.0764e+01 7.9948e-01 3.9790e-01 9:51:28 99913

reversed flow in 20 faces on pressure-outlet 7.

reversed flow in 9 faces on pressure-outlet 8.

Error: divergence detected in AMG solver: temperature
Error Object: ()
"

and that is my udf(x.c)...i used swirl component in it for total temperature
i don't know how solve this error
anybody can help me??
G340 is offline   Reply With Quote

Old   August 21, 2013, 04:22
Default
  #2
Senior Member
 
Paritosh Vasava
Join Date: Oct 2012
Location: Lappeenranta, Finland
Posts: 732
Rep Power: 22
vasava will become famous soon enough
These errors indicate that you have poor mesh quality in some regions. Try refining your mesh and give it a try. Also play little bit with the relaxation factors. Either or both of these tricks could help.
vasava is offline   Reply With Quote

Old   August 21, 2013, 05:37
Default
  #3
New Member
 
Join Date: Jul 2013
Posts: 2
Rep Power: 0
mojtaba7192 is on a distinguished road
i think my udf also is false:

#include"udf.h"
realX; realY;
DEFINE_ADJUST(XY,domain,t)
{
real w=0.0004975;
face_t f; Domain*domain;
Thread*t; cell_tc; intID=20;
thread_loop_f(t,domain)
{
begin_c_loop(c,t) X+=C_R(c,t)*C_U(c,t)*C_VOLUME_2D(c,t)*(C_T(c,t)+w*(C_U(c,t)*C_U(c,t)+C_V(c,t)*C_V(c,t)+C_WSWIRL(c,t)*C_WSWIRL(c,t)));
Y+=C_U(c,t)*C_VOLUME_2D(c,t)*C_R(c,t);
end_c_loop(c,t)
}
}


DEFINE_PROFILE(BackflowTemp,thread,i)
{
real s=0.00000001;
face_tf;
begin_f_loop(f,thread)
{
F_PROFILE(f,thread,i)=(X)/((Y)+s);
}
end_f_loop(f,thread)
}
mojtaba7192 is offline   Reply With Quote

Old   August 21, 2013, 05:56
Default
  #4
Senior Member
 
Paritosh Vasava
Join Date: Oct 2012
Location: Lappeenranta, Finland
Posts: 732
Rep Power: 22
vasava will become famous soon enough
DEFINE_ADJUST macro has only two arguments and you have three. Also avoid using names such as X, Y as macro names.

Reading this (http://aerojet.engr.ucdavis.edu/flue...udf/node20.htm) might help.
vasava is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF for 3D turbulent fully developed flow howhs Fluent UDF and Scheme Programming 0 August 1, 2013 12:47
Inlet won't apply UDF and has temperature at 0K! tccruise Fluent UDF and Scheme Programming 2 September 14, 2012 07:08
how to set up high temperature gas turbine flow simulation? adam2008 CFX 1 July 22, 2009 19:33
why is solid temperature same as fluid temperature on flow simulation ? qihongming FloEFD, FloWorks & FloTHERM 0 May 26, 2009 09:57
Access Granular Temperature in UDF Gavin FLUENT 5 July 22, 2005 12:06


All times are GMT -4. The time now is 07:52.