CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent UDF and Scheme Programming

Mixing loop reactor, recycle UDF

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 25, 2015, 13:33
Default Mixing loop reactor, recycle UDF
  #1
Member
 
Tleja
Join Date: Sep 2013
Posts: 40
Rep Power: 12
Tleja is on a distinguished road
Hi everyone!

At the moment, I'm struggling how to write UDF for recycle feed in mixing loop reactor. As my reactor picture i uploaded, My system consists of two liquid phases (H20 and ethanol).
Actually, centrifugal Pump should be included in full system. But i don't concern about pump hydrodynamic, so i simplified this system by removing pump unit.

My mixing loop reactor picture
http://s16.postimg.org/qw45noy11/loopmixing.png

My strategy to operate.

At starting time, water and ethanol were patched like what i showed.
When i start this system, liquid mixture at the bottom will be sucked 5 liter/sec at outlet. And then liquid mixture 5 liter/sec ,which is sucked, will recycle to inlet at the same quantity. H2O and ethanol will be mixed with each other along time.

Could anyone advise me how to solve this problem?

In my opinion, I think feed inlet should be adjusted to be equal to outlet by using UDF

Which macro can i use for solving this problem?

Best regard
Tleja
Tleja is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to access only one phase in multiphase model by UDF wersoe Fluent UDF and Scheme Programming 1 January 4, 2017 08:11
Loop over the faces of a cell in UDF Anthony Wachs Fluent UDF and Scheme Programming 5 September 20, 2015 08:22
UDF for Oscillating Membrane/Diaphragm of a Synthetic Jet cuan1029 Fluent UDF and Scheme Programming 0 December 8, 2014 09:20
UDF parallel error: chip-exec: function not found????? shankara.2 Fluent UDF and Scheme Programming 1 January 16, 2012 23:14
UDF...UDF...UDF...UDF Luc SEMINEL FLUENT 0 November 25, 2002 05:03


All times are GMT -4. The time now is 06:24.