|
[Sponsors] |
How to get the temperature at the cell where C_VOF(c,t)=0.5? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 21, 2009, 13:22 |
How to get the temperature at the cell where C_VOF(c,t)=0.5?
|
#1 |
New Member
Xinqiang Xu
Join Date: Mar 2009
Posts: 5
Rep Power: 17 |
Hi,
Do you know how to get the temperature at the location where C_VOF(c, t)=0.5 by UDF? Thanks. Xinqiang |
|
August 18, 2009, 18:15 |
|
#2 |
New Member
Bobby
Join Date: Aug 2009
Posts: 7
Rep Power: 16 |
Well you will have to traverse through the domain and check for the vof of each cell. In addition, you will have to put limits on the vof rather than one specific number such as 0.5. Record the temp. of the cells that are within the specified interval range (e.g. vof between 0.49 and 0.51).
Hope this helps! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Calculation of the Governing Equations | Mihail | CFX | 7 | September 7, 2014 06:27 |
FvMatrix coefficients | shrina | OpenFOAM Running, Solving & CFD | 10 | October 3, 2013 14:38 |
Ultra high temperature? | bk | Siemens | 2 | July 19, 2005 00:01 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |
Warning 097- | AB | Siemens | 6 | November 15, 2004 04:41 |