Linking pre-compiled UDFs to Fluent

gracerlima · April 3, 2010, 11:52

Hi everybody!

I compiled a UDF for grid motion using visual c++ command prompt window. It worked well.
Now I am supposed to link this pre-compiled UDF to Fluent using the following command line (at the libudf directory) suggested in the UDF users guide:

make "FLUENT_ARCH=ntx86"

but it is not working.
It gives me the following answer:

make command not found

can anybody help me to solve this problem?

Thanks in advance!

DoHander · April 3, 2010, 14:00

You need to "LOAD" your UDF in Fluent from the Fluent menu, no need to use any command line, anyway on Visual Studio make is probably ... nmake.

Try with nmake ...

Do

gracerlima · April 3, 2010, 14:16

Hi DoHander,

I tried to compile my UDF using the GUI of Fluent in the Windows but it didn't worked, then I compiled it in the visual c++ using the command nmake as is shown in the UDF user's manual.

After this step, there is another step that is linking this pre-compiled UDF to fluent and then I used this command

make "FLUENT_ARCH = ntx86" and then it appears the problem.

I think that maybe it could be a kind-of gnu feature that I should have installed on my machine...

If you have any further idea on this...please write to me!!!

Thanks

April 3, 2010, 11:52	Linking pre-compiled UDFs to Fluent	#1
gracerlima New Member Grace Lima Join Date: Mar 2010 Posts: 7 Rep Power: 16	Hi everybody! I compiled a UDF for grid motion using visual c++ command prompt window. It worked well. Now I am supposed to link this pre-compiled UDF to Fluent using the following command line (at the libudf directory) suggested in the UDF users guide: make "FLUENT_ARCH=ntx86" but it is not working. It gives me the following answer: make command not found can anybody help me to solve this problem? Thanks in advance!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
linking matlab and fluent	Nair	FLUENT	23	January 12, 2020 18:55
problem of running parallel Fluent on linux cluster	ivanbuz	FLUENT	15	September 23, 2017 19:12
On Bug of Fluent 12.0	lzgwhy	FLUENT	0	August 26, 2009 06:41
UDFs for FLUENT 6.0	ting	Main CFD Forum	1	December 4, 2003 22:56
Compiling and linking UDS in FLUENT 4.5	Raja Banerjee	FLUENT	1	August 3, 2000 00:07

April 3, 2010, 14:00		#2
DoHander Senior Member Join Date: Nov 2009 Posts: 411 Rep Power: 19	You need to "LOAD" your UDF in Fluent from the Fluent menu, no need to use any command line, anyway on Visual Studio make is probably ... nmake. Try with nmake ... Do

April 3, 2010, 14:16		#3
gracerlima New Member Grace Lima Join Date: Mar 2010 Posts: 7 Rep Power: 16	Hi DoHander, I tried to compile my UDF using the GUI of Fluent in the Windows but it didn't worked, then I compiled it in the visual c++ using the command nmake as is shown in the UDF user's manual. After this step, there is another step that is linking this pre-compiled UDF to fluent and then I used this command make "FLUENT_ARCH = ntx86" and then it appears the problem. I think that maybe it could be a kind-of gnu feature that I should have installed on my machine... If you have any further idea on this...please write to me!!! Thanks