|
[Sponsors] |
July 21, 2020, 00:37 |
Convergence problem
|
#1 |
Member
Ahmed
Join Date: Sep 2019
Posts: 34
Rep Power: 6 |
hello
the residuals and monitored quantities keeps fluctuating in the steady state simulation so I tried to make under relaxation of 0.1 and time scale factor of 0.1( at iteration 7500 ) and it is still fluctuating too what else should i try to reach convergence of monitored quantities ? the problem : simulating water inside tank which is bing charged by heat pipes - k-w SST turbulence modelling |
|
July 21, 2020, 01:30 |
|
#2 |
Member
Guven Nergiz
Join Date: Jul 2020
Location: Turkey
Posts: 52
Rep Power: 5 |
Hi Ahmed,
There are many reasons for this situation. Lets start with mesh quality, may you share skewness and ortho. quality of your mesh? Thank you. |
|
July 21, 2020, 03:47 |
|
#3 |
Member
Ahmed
Join Date: Sep 2019
Posts: 34
Rep Power: 6 |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Convergence problem in Fluent for quenching process | kaeran | FLUENT | 4 | December 1, 2014 02:14 |
Rotate frame reference convergence problem! | wjy-c | CFX | 2 | September 26, 2014 06:03 |
Centrifugal pump OpenFOAM, convergence problem, ANSA model | RDD | OpenFOAM Running, Solving & CFD | 0 | July 5, 2014 09:12 |
Convergence Problem in Axisymmetric Periodic Flow | atheresia | FLUENT | 3 | February 10, 2014 03:00 |
Convergence of CFX field in FSI analysis | nasdak | CFX | 2 | June 29, 2009 01:17 |