Fluent Combsution Need Zimont Paper Help

laxwendrofzx9r · May 8, 2012, 10:41

Dear, I'm trying to set-up a part-premix. combustion and looking for critical flame rate of strain. In Fluent documentation is stated that I can find various values in Zimont Paper: "An Efficient Computational Model for Premixed Turbulent Combustion at High Reynolds Numbers Based on a Turbulent Flame Speed Closure" maybe somebody can help me and send me the pdf file?

Also maybe somebody know some values or critical strain rate, from all sort of gas turbine combustors?
I found that for GE-LM16000 is around a(gr)=11700(s-1)

pachputesharad · July 21, 2020, 07:30

CFD Modeling of Turbulent Combustion, refer " CFD Flow Engineering" :
https://cfdflowengineering.com/cfd-m...nt-combustion/

May 8, 2012, 10:41	Fluent Combsution Need Zimont Paper Help	#1
laxwendrofzx9r New Member mirion Join Date: Dec 2010 Posts: 24 Rep Power: 15	Dear, I'm trying to set-up a part-premix. combustion and looking for critical flame rate of strain. In Fluent documentation is stated that I can find various values in Zimont Paper: "An Efficient Computational Model for Premixed Turbulent Combustion at High Reynolds Numbers Based on a Turbulent Flame Speed Closure" maybe somebody can help me and send me the pdf file? Also maybe somebody know some values or critical strain rate, from all sort of gas turbine combustors? I found that for GE-LM16000 is around a(gr)=11700(s-1)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stopping a Fluent batch job AND saving the data! Possible?	Volker Pawlik	FLUENT	13	December 28, 2020 04:16
A Problem of Fluent Interpreted UDF: parse error	knight	Fluent UDF and Scheme Programming	25	August 16, 2018 10:26
heat transfer with RANS wall function, over a flat plate (validation with fluent)	bruce	OpenFOAM Running, Solving & CFD	6	January 20, 2017 06:22
Compared MRFSimpleFoam and Fluent in a centrifugal pump!	renyun0511	OpenFOAM Running, Solving & CFD	8	July 6, 2010 06:24
Fluent 12.0 is worst then Fluent 6.2	herntan	FLUENT	5	December 14, 2009 02:57

July 21, 2020, 07:30		#2
pachputesharad New Member Dr.Sharad Pachpute Join Date: Aug 2010 Location: Pune, India Posts: 9 Blog Entries: 1 Rep Power: 15	CFD Modeling of Turbulent Combustion, refer " CFD Flow Engineering" : https://cfdflowengineering.com/cfd-m...nt-combustion/