CFD Online Discussion Forums

CFD Online Discussion Forums (
-   FLUENT (
-   -   Turbulent flow of non-Newtonian fluids in Ansys 13 Fluent (

emil May 10, 2012 07:19

Turbulent flow of non-Newtonian fluids in Ansys 13 Fluent
Hello everyone,

I would kindly ask you for a hint if it is possible to simulate a turbulent flow of a non-Newtonian fluid in this newer version of fluent because the comand define/models/ viscous/turbulence-expert/turb-non-newtonian? doesn't seem to work anymore.



sameer10dulkar February 23, 2013 14:41

Hey Emil,

I am using Fluent 14.0 and there is a way to enable turbulence modelling for Non-newtonian fluids in it using the TUI command that you have mentioned.

This is how I got it to work:
First select turbulence modelling (select the model that you want to use) in models.
Then go to the TUI and type the following
define/models/ viscous/turbulence- expert/turb-non-newtonian?

and then make the material model (non newtonian fluid) that you want to model. For some reason it works like this.
You can find more information on it in the User guide 13.14.20. Section called "modelling turbulence with non-Newtonian fluids" pg# 721/791

Hope this helps.


emil February 25, 2013 05:26

Thank you for your help!

Best regards!

All times are GMT -4. The time now is 07:22.