CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Surface etching depending on concentration

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 16, 2012, 03:27
Default Surface etching depending on concentration
  #1
New Member
 
Ben
Join Date: May 2012
Posts: 1
Rep Power: 0
Oxirane is on a distinguished road
Hi,

I've been using fluent to look at concentration gradients within a microfluidic device.

Does anyone know if it is possible to model etching (and hence find the subsequent change in shape) of a solid using the species transport, and if possible thermal, data?

i.e
1. Solve for the species in the initial channel
2. Alter the mesh to remove parts of the solid (more removed in high concentration areas)
3. Iterate, etc.

Cheers,
Ben
Oxirane is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with Gmsh nishant_hull Open Source Meshers: Gmsh, Netgen, CGNS, ... 18 April 22, 2015 08:43
killed "snappyHexMesh" parkh32 OpenFOAM Pre-Processing 2 April 8, 2012 17:12
Concentration dependent surface tension stulle Fluent UDF and Scheme Programming 1 August 12, 2011 14:01
[ICEM] Automatic mesh generation script surface intersection problem stuart23 ANSYS Meshing & Geometry 0 May 13, 2011 01:10
Recover surface from surface mesh in IcemCFD Jerry Tanner CFX 0 August 20, 2008 12:48


All times are GMT -4. The time now is 00:32.