|
[Sponsors] |
Performing Simulation of CRM and getting abnormal results of Cl and Cd |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 18, 2012, 10:58 |
Performing Simulation of CRM and getting abnormal results of Cl and Cd
|
#1 |
New Member
Sulman Aziz
Join Date: May 2012
Posts: 8
Rep Power: 13 |
Hi everyone,
I am performing the simulation of NASA CRM using ANSYS Fluent 14.0, I have created an unstructured mesh using ICEM CFD. I have few questions.. 1. I don't know why i m getting abnormal values of Cl and Cd..? 2. Can anyone tell me how to set the reference values..? May be i have put in the wrong reference values. The values that i am using are Area: 4130 ft^2 Length: 1190 ft I shall b very thankful for your help. Regards Sulman Aziz |
|
May 18, 2012, 12:21 |
|
#3 |
New Member
Sulman Aziz
Join Date: May 2012
Posts: 8
Rep Power: 13 |
Thank your very much for this quick response.
I have attached the files of geometry, mesh and convergence history plots of Cd and Cl. The current values for Cl = -1.0880e+01 Cd = 2.3813e+01 |
|
May 18, 2012, 12:34 |
|
#5 |
New Member
Sulman Aziz
Join Date: May 2012
Posts: 8
Rep Power: 13 |
CRM is abbreviation for Common Research Model.. I had mentioned it in the image of model.
Its airplane DLR- F6 geometry.. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|