|
[Sponsors] |
May 21, 2012, 06:19 |
pressure boundary condition
|
#1 |
Senior Member
hamid
Join Date: Nov 2010
Posts: 185
Rep Power: 15 |
Hi All
Is it possible to set all the boundary conditions, "pressure outlet"? this is to create a vacuum in a pipe with a stationary fluid inside .. |
|
May 21, 2012, 07:11 |
|
#2 |
New Member
kumar ravi
Join Date: May 2012
Posts: 4
Rep Power: 13 |
hi,
without an inlet ..its not possible to define an outlet. so not possible to define all the boundaries as outlets. |
|
May 21, 2012, 08:37 |
|
#3 |
Senior Member
hamid
Join Date: Nov 2010
Posts: 185
Rep Power: 15 |
thanks for reply,
the idea is to apply an aspiration in a domain which is initially still (no fluid movement before applying the aspiration force), and after applying the aspiration force the fluid should move from inlets to the aspiration boundary (aspiration boundary = minus static pressure or minus pressure outlet) do you think i have to impose inlet pressure at inlets, p.s. i imposed pressure outlet on every boundary, it actually works but the results is not correct to me .. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wind turbine simulation | Saturn | CFX | 58 | July 3, 2020 01:13 |
mixed inflow/outflow downstream boundary condition question | peob | OpenFOAM Running, Solving & CFD | 3 | February 3, 2017 10:54 |
Pressure boundary condition | C-H Kuo | Main CFD Forum | 18 | September 16, 2016 03:19 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
Pressure Boundary condition | abishek | FLUENT | 1 | July 28, 2008 08:14 |