CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   2 way FSI tetrahedral mesh (http://www.cfd-online.com/Forums/fluent/104415-2-way-fsi-tetrahedral-mesh.html)

Katerina July 9, 2012 07:34

2 way FSI tetrahedral mesh
 
Hi all.

I solve 2 way FSI analysis (Fluent-Transient Structural analysis in Workbench R14) with large deformations of fluid mesh. I did the tutorial for system coupling. I ran my analysis with hexahedral mesh, but with some limits caused by large deformations (high distortion - solution failed).

Please, does anyone have experience with a tetrahedral mesh in 2w FSI? I'm not able to run the analysis. Always with error:

+================================================= ===================+
| NOTICE |
| An exception has occurred and has been transmitted to the coupling |
| participants. These participants have been disconnected from the |
| coupling service. |
+================================================= ===================+



+================================================= ===================+
| System Coupling Exception |
+================================================= ===================+
| Origin : Fluid Flow (FLUENT) (Solution 1) |
| Error Code : 2 |
| Error Description : |
| Fluent encountered fatal error after sync point Solve |
+================================================= ===================+


Thank you.
Regards,
Katerina

mg.mithun October 22, 2012 17:15

Hi Katerina, If can you send me the tutorial that you have for 2 way fsi ( fluent+ Ansys mechanical)that will be a great favor. I am expecting that you will reply to this thread.
my mail Id mg.mithun@gmail.com


All times are GMT -4. The time now is 07:33.