CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Porous media in Fluent (http://www.cfd-online.com/Forums/fluent/104703-porous-media-fluent.html)

moloykb July 13, 2012 06:30

Porous media in Fluent
 
1 Attachment(s)
Dear all..
I want to simulate the problem of flow through a porous medium in 2D case. The geometry of the flow is attached herewith. Please provide me the detail steps involved in the creation of the geometry in ansys design modeller along with the meshing part and boundary condition.
Also give some idea about how to modify the same for the 3D case.
Waiting for the reply from your side.....

flotus1 July 13, 2012 07:45

I would be grateful to do this work for you.
If you give me your email, i will send you the simulation setup including the results.

moloykb July 16, 2012 00:03

Thanks for the reply. My email ID is moloy_kb@yahoo.com

Ivanesus July 16, 2012 07:20

Hi, flotus1.
In your example from an outflow boundary on porous medium escaping there is a process of combustion or there is a radiation source? How you allow for radiating received by a porous medium?
Please send also to me your example. ivanesus@mail.ru

moloykb July 20, 2012 00:28

Hi flotus1
are u ready with your set up then pl. send me.....

ahmad_kassabah October 12, 2012 08:04

Quote:

Originally Posted by moloykb (Post 371549)
Thanks for the reply. My email ID is moloy_kb@yahoo.com


CAN you send me the details of the answer of the problem? geometry,mesh,setup,solution

ahmad_kassabah October 12, 2012 08:05

Quote:

Originally Posted by flotus1 (Post 371290)
I would be grateful to do this work for you.
If you give me your email, i will send you the simulation setup including the results.



CAN you send me the details of the answer of the problem? geometry,mesh,setup,solution

syavash October 12, 2012 22:17

Quote:

Originally Posted by flotus1 (Post 371290)
I would be grateful to do this work for you.
If you give me your email, i will send you the simulation setup including the results.

Dear Alex,
Would you be kind to send me the example solution files and set up?
My E-mail is syavash_azna@yahoo.com
tnx.

ahmad_kassabah October 14, 2012 05:06

Quote:

Originally Posted by ahmad_kassabah (Post 386268)
CAN you send me the details of the answer of the problem? geometry,mesh,setup,solution


MY Email is: ahmad_kassabah@yahoo.com

ahmad_kassabah October 14, 2012 05:08

My Email is: ahmad_kassabah@yahoo.com

ahmad_kassabah October 14, 2012 05:10

Quote:

Originally Posted by flotus1 (Post 371290)
I would be grateful to do this work for you.
If you give me your email, i will send you the simulation setup including the results.

My Email is:
ahmad_kassabah@yahoo.com

ahmad_kassabah October 14, 2012 05:14

Quote:

Originally Posted by syavash (Post 386363)
Dear Alex,
Would you be kind to send me the example solution files and set up?
My E-mail is syavash_azna@yahoo.com
tnx.

Pleas send me too "Flow through porous media: My Email is: ahmad_kassabah@yahoo.com


********
http://www.cfd-online.com/Forums/flu...tml#post371290

ahmad_kassabah October 14, 2012 05:17

Quote:

Originally Posted by ahmad_kassabah (Post 386268)
CAN you send me the details of the answer of the problem? geometry,mesh,setup,solution

My Email is: ahmad_kassabah@yahoo.com

I'm using Ansys 14 for fluent (Designmodular, Meshing, Setup)...

Thanking you

ahmad_kassabah October 14, 2012 05:18

My Email is: ahmad_kassabah@yahoo.com

I'm using Ansys 14 for fluent (Designmodular, Meshing, Setup)...

Thanking you

Quote:

Originally Posted by ahmad_kassabah (Post 386268)
CAN you send me the details of the answer of the problem? geometry,mesh,setup,solution


ahmad_kassabah October 14, 2012 05:20

Quote:

Originally Posted by ahmad_kassabah (Post 386268)
CAN you send me the details of the answer of the problem? geometry,mesh,setup,solution

My Email is: ahmad_kassabah@yahoo.com

I'm using Ansys 14 for fluent (Designmodular, Meshing, Setup)...

Thanking you

ahmad_kassabah October 14, 2012 05:22

Quote:

Originally Posted by ahmad_kassabah (Post 386268)
CAN you send me the details of the answer of the problem? geometry,mesh,setup,solution

My Email is: ahmad_kassabah@yahoo.com

I'm using Ansys 14 for fluent (Designmodular, Meshing, Setup)...

Thanking you

ahmad_kassabah October 14, 2012 06:29

Quote:

Originally Posted by ahmad_kassabah (Post 386268)
CAN you send me the details of the answer of the problem? geometry,mesh,setup,solution

ahmad_kassabah@yahoo.com

ahmad_kassabah October 14, 2012 06:31

Quote:

Originally Posted by flotus1 (Post 371290)
I would be grateful to do this work for you.
If you give me your email, i will send you the simulation setup including the results.


ahmad_kassabah@yahoo.com

jobito_2012 October 14, 2012 15:05

CAN you send me the details of the answer of the problem? geometry,mesh,setup,solutio
 
Quote:

Originally Posted by ahmad_kassabah (Post 386520)


my mails is aguilera1623@gmail.com

thanks a lot!!:)

2271554457 April 17, 2013 22:04

hi,flotus1! I am simulating a same case, but i am puzzled about the settings, because in my case,there exists a heat transfer between the fluid and the porous media, i want to calculate the different temperatures of the two medium, can you email me a detailed setting case. I greatly expect your replies, thank you so much!
all the best! 2271554457@qq.com


All times are GMT -4. The time now is 23:17.