CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Tcp transport error (http://www.cfd-online.com/Forums/fluent/104950-tcp-transport-error.html)

Adriana July 19, 2012 09:10

Tcp transport error
 
Hi,
I have a problem with Fluent. I am running Ansys 13 under Scientific Linux 6.1. The problem is, when I want to create the mesh, the geometry cannot load in. I get an error message: “Tcp transport error”

System.Runtime.Remoting.RemotingException: Connection closed
at System.Runtime.Remoting.Channels.Tcp.TcpMessageIO. StreamRead (System.IO.Stream networkStream, System.Byte[] buffer, Int32 count) [0x00000]
at System.Runtime.Remoting.Channels.Tcp.TcpMessageIO. ReceiveMessageStatus (System.IO.Stream networkStream, System.Byte[] buffer) [0x00000]
--- System.Runtime.Remoting.RemotingException: Tcp transport error.
at System.Runtime.Remoting.Channels.Tcp.TcpMessageIO. ReceiveMessageStatus (System.IO.Stream networkStream, System.Byte[] buffer) [0x00000]
at System.Runtime.Remoting.Channels.Tcp.TcpClientTran sportSink.ProcessMessage (IMessage msg, ITransportHeaders requestHeaders, System.IO.Stream requestStream, ITransportHeaders& responseHeaders, System.IO.Stream& responseStream) [0x00000]
at System.Runtime.Remoting.Channels.BinaryClientForma tterSink.SyncProcessMessage (IMessage msg) [0x00000]
--- Ansys.Core.Commands.CommandFailedException: Tcp transport error.
CommandName: DesignModeler.EditGeometry(GeometryContainer="Geom etry", Interactive=False)
at Ansys.Core.Commands.CommandAsyncResult.RethrowFail ureException (System.Exception e) [0x00000]
at Ansys.Core.Commands.CommandAsyncResult.Wait (Int32 milliSecondsTimeout, Boolean exitContext) [0x00000]
at Ansys.Core.Commands.CommandAsyncResult.Wait () [0x00000]
at Ansys.DesignModeler.Core.Commands.EditGeometry.Inv okeAndWait (IProtectedContext context, Ansys.Core.DataModel.ProjectSystem.DataContainerRe ference GeometryContainer, Boolean Interactive, Boolean IsSpaceClaimGeometry) [0x00000]
at Ansys.DesignModeler.Core.Commands.ActivateDM.Execu te (IFullContext context) [0x00000]
at Ansys.Core.Commands.Concurrency.CommandWorkUnit.ex ecuteInContext (Ansys.Core.Commands.CommandContext subContext, IExecutionEngineCallback tracer) [0x00000]
--- Ansys.Core.Commands.CommandFailedException: Tcp transport error.
CommandName: DesignModeler.ActivateDM(GeometryContainer="Geomet ry")
at Ansys.Core.Commands.CommandAsyncResult.RethrowFail ureException (System.Exception e) [0x00000]
at Ansys.Core.Commands.CommandAsyncResult.Wait (Int32 milliSecondsTimeout, Boolean exitContext) [0x00000]
at Ansys.Core.Commands.CommandAsyncResult.Wait () [0x00000]
at Ansys.Meshing.Core.Commands.RefreshModel.ActivateD esignModeler (IFullContext context, Ansys.Core.DataModel.ProjectSystem.DataContainerRe ference geomContainer, System.String& plugInName) [0x00000]
at Ansys.Meshing.Core.Commands.RefreshModel.AttachGeo metry (IFullContext context, Ansys.Meshing.Core.Commands.DataSourceHelper helper, System.String strGeometryFile, System.String plugInName, Ansys.Core.DataModel.DataReference modelRef, Ansys.Core.DataModel.DataReference connectionRef, Ansys.Meshing.Core.DataModel.SimulationConnection connectionObject) [0x00000]
at Ansys.Meshing.Core.Commands.RefreshModel.HandleGeo metryFile (Ansys.Core.DataModel.DataReference drGeometryFile, System.String plugInName, System.String geometryFilePath, IFullContext context) [0x00000]
at Ansys.Meshing.Core.Commands.RefreshModel.ExecuteCo mmand (IFullContext context) [0x00000]
at Ansys.Addins.Api.CommandHelper.Execute (IFullContext context) [0x00000]
--- Ansys.Core.Commands.CommandFailedException: Tcp transport error.
CommandName: Meshing.RefreshModel(Container="Mesh")
at Ansys.Core.Commands.CommandAsyncResult.RethrowFail ureException (System.Exception e) [0x00000]
at Ansys.Core.Commands.CommandAsyncResult.Wait (Int32 milliSecondsTimeout, Boolean exitContext) [0x00000]
at Ansys.Core.Commands.CommandAsyncResult.Wait () [0x00000]
at Ansys.ProjectSchematic.Commands.RefreshCommand.Ref reshComponents (IFullContext context, IEnumerable`1 componentsToRefresh) [0x00000]
--- Ansys.Core.Commands.CommandFailedException: Tcp transport error.
CommandName: RefreshComponent(Component="/Schematic/Component:Mesh")
at Ansys.Core.Commands.CommandAsyncResult.RethrowFail ureException (System.Exception e) [0x00000]
at Ansys.Core.Commands.CommandAsyncResult.Wait (Int32 milliSecondsTimeout, Boolean exitContext) [0x00000]
at Ansys.Core.Commands.CommandAsyncResult.Wait () [0x00000]
at Ansys.ProjectSchematic.Commands.RefreshComponentCo mmand.InvokeAndWait (IProtectedContext context, Ansys.Core.DataModel.DataReference Component) [0x00000]
at Ansys.Meshing.GUI.EditModel.Invoke (Ansys.UI.GuiOperationContext context) [0x00000]
at Ansys.UI.GuiOperationContext.Invoke (Ansys.UI.GuiOperationMetaData operationData) [0x00000]
at Ansys.UI.UIManager+<InvokeOperation>c__AnonStorey3 5.<>m__1D () [0x00000]
at Ansys.UI.UIManager.InvokeOperationCore (System.String pseudoname, Ansys.UI.Views.OperationDelegate callback, Boolean allowOSMessages, Boolean coreTransaction) [0x00000]


Could you help me to solve this issue? I have very limited experience with Ansys.
Thank you very much in advance!
Adriana

Jibi December 21, 2012 06:31

Hello,

I get the same message, did you solve this problem ?

Thanks

JB


All times are GMT -4. The time now is 13:26.