|
[Sponsors] |
July 20, 2012, 01:48 |
problem of semi-transperant wall
|
#1 |
New Member
Wei Kai CHEN
Join Date: Jul 2012
Posts: 2
Rep Power: 0 |
Bonjour,
I'm recently running the simulation of solar radiation problem. There's no other heat resource but the sun light, and I've set a semi-transparent wall facing to the sun, but when I was going to run the circulation I got the warning shown as follow ------------------------------------------------------------------------- Theoretical Maximum: Sun Direction Vector: X: 0.0450431, Y: 0.304243, Z: -0.951529 Sunshine Fraction: 1 Direct Normal Solar Irradiation [W/m^2]: 1423 Warning: The neighboring cell threads (13 and 10) of semi-transparent wall zone 15 are not fluid. This problem MUST be fixed before proceeding! ------------------------------------------------------------------------- any suggestion would be helpful thanks Weikai CHEN |
|
July 20, 2012, 02:37 |
|
#2 |
Super Moderator
Alex
Join Date: Jun 2012
Location: Germany
Posts: 3,396
Rep Power: 46 |
I haven't run into this error yet, but if I were you I would do what the error message tells me.
Put a fluid next to the semi-transparent wall. |
|
July 20, 2012, 02:48 |
|
#3 |
New Member
Wei Kai CHEN
Join Date: Jul 2012
Posts: 2
Rep Power: 0 |
||
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with wall function | gregjunqua | OpenFOAM | 5 | August 26, 2011 00:32 |
Two Sided wall Problem | Mk1987 | ANSYS Meshing & Geometry | 0 | March 26, 2010 14:37 |
Problem Interface Solid Fluid with wall velocity Solver v12 | hills1 | CFX | 2 | October 12, 2009 06:36 |
Adiabatic and Rotating wall (Convection problem) | ParodDav | CFX | 5 | April 29, 2007 20:13 |
moving wall BC problem | Sourabh | Main CFD Forum | 1 | August 8, 2006 08:47 |