Total Pressure problem in a duct
4 Attachment(s)
Hello
Please help me I created a 2D S-duct, the contours are as follows 1.Static pressure 2.Velocity contours 3. Total pressure gradient graph intake Velocity 20m/s Guage pressure is taken as '0' pascals there is flow separation and reversal at + cruvature created a rake through the duct to find out the pressure gradient but the total pressure should be constant in duct, only static pressure changes but i was unable to find out what physical problem is causing such as change as shown in graph Thanks in Advance |
All times are GMT -4. The time now is 00:22. |