CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

the different result with different Amush

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree3Likes
  • 3 Post By sooroo3

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 13, 2012, 05:37
Smile the different result with different Amush
  #1
New Member
 
Fangdian
Join Date: Aug 2012
Posts: 19
Rep Power: 13
fangdian is on a distinguished road
Hi
I use the VOF & solidfication and melting model these days. When I set the mushy zone constant Amush, I found it has different results with different Amush(the recomended value is 1e4~1e7) .
My problem like this :
A briquette steel lays on the bottom of a case with idea air. the solidus and liquidus temperature is set to 177K and 1793k. The pure solvent melting heat is 270e3J/kg.
there is no any heat soure in the system, and the system is initialized with room temperature 300K.
With small Amush ,1e4 for example, why the steel deform with enough time ?
With differnt Amush, the deformation of steel is differnt. The bigger Amush, the little more time needed with deformation.
WHy?
thanks!
fangdian is offline   Reply With Quote

Old   November 26, 2012, 09:25
Default
  #2
New Member
 
YG Kim
Join Date: Nov 2010
Posts: 15
Rep Power: 15
sooroo3 is on a distinguished road
I also did works by use of VOF & melting model in Fluent. Amush(morphology constant) looks like constant, but it has kg/(ms) as unit. As I know, Voller tested solidification behavior with variable Amush. By the way, when we look at Voller's or related papers, it is more easy to figure out what Amush is. As can be seen, it has same unit with dynamic viscosity. Thus, somehow we can image it as like draging. Increasing Amush, flow in mushy zone is quite tough to pass through it like dense liquid which pass through porous nozzle. Hope it help a bit.
ghost82, MrDaimon and jyothsna k like this.
sooroo3 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Comparison the airfoil 0012 experimental result and simulation result harrislcy FLUENT 30 August 29, 2013 11:27
How to display the whole result of a periodic model via one period result? dixylo FLUENT 2 February 23, 2012 05:11
Read Result Files or User Defined Result Aquilaris ANSYS 0 February 9, 2011 06:25
In a distance above the ground, my LES result is not good panda60 OpenFOAM 2 January 22, 2010 08:52
LES result harrislcy FLUENT 1 December 28, 2009 07:29


All times are GMT -4. The time now is 05:59.