|
[Sponsors] |
August 15, 2012, 07:38 |
slope plane in CFD post
|
#1 |
New Member
Theerawat
Join Date: Jul 2012
Posts: 22
Rep Power: 13 |
Hi guys, I want to see the velocity profile but the plane is not xy yz and xz plane. It's 15 degree relative to xz plane. How do I build that plane to look at my profile in CFD post.
Thank you |
|
August 16, 2012, 05:20 |
|
#3 |
New Member
Join Date: Dec 2011
Location: Sweden
Posts: 13
Rep Power: 14 |
The easiest way to do this in my opinion is to find three points on your surface, (all three can for obious reason not lay on a straight line), the under "method" you chose to define the plane from three points...
|
|
August 16, 2012, 05:35 |
Thankyou
|
#4 |
New Member
Theerawat
Join Date: Jul 2012
Posts: 22
Rep Power: 13 |
Thank you very much, Is your suggestion used in Fluent or in CFD post. I can't find it in CFD post. could you please explain me briefly.
|
|
August 16, 2012, 06:00 |
|
#5 |
New Member
Join Date: Dec 2011
Location: Sweden
Posts: 13
Rep Power: 14 |
If you refer to my reply it is in CFD-post.
Click surfaces > plane in the lower left part of the screen where you adjust your plane, under method you chose define from three points. |
|
August 16, 2012, 12:08 |
|
#6 |
New Member
Theerawat
Join Date: Jul 2012
Posts: 22
Rep Power: 13 |
Thank you for your help very much, Can I ask you about CFD next time. If you say yes, Could you give me an email.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ANSYS Meshing] Displaying solid domains in CFD Post without meshing them. | hda | ANSYS Meshing & Geometry | 5 | October 24, 2016 09:26 |
CFD Design...The CFD Future | John C. Chien | Main CFD Forum | 20 | November 19, 2015 23:40 |
Plotting Radial Velocity and Tangential Velocity in CFD Post | ashtonJ | CFX | 5 | July 13, 2015 02:49 |
CFD for fans & blower housings | David Carroll | Main CFD Forum | 8 | August 24, 2000 17:25 |
public CFD Code development | Heinz Wilkening | Main CFD Forum | 38 | March 5, 1999 11:44 |