CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Fluent is not accepting Modification in Material properties (http://www.cfd-online.com/Forums/fluent/106570-fluent-not-accepting-modification-material-properties.html)

er.mkumar September 1, 2012 14:24

Fluent is not accepting Modification in Material properties
 
Hello All,

SUB: Fluent is not accepting Modification in Material properties

I have found myself in this unlikely situation wherein I'm unable to modify or so to say declare a new material by changing the values of Material Properties.
Actually the problem goes like this...

I need to work on porous media, so while defining my 'Fluid' in 'Boundary Condition' I need to select 'porous medium' and in porous medium tab I declare the properties of the medium and the finally the 'sold material'.

But before I do all this I need to define the fluid & solid material with my own properties. Up-till now I was able to change these but suddenly after yesterday night for unknown reason the material properties that could be changed has reduced to 'Two'. I have no clue how to deal with this.

I tried re-installing Fluent 6.3.26 but of no use.

Can some throw some light on this unique problem facing me.

Awaiting your kind reply.

Regards.
Mukesh


All times are GMT -4. The time now is 23:23.