CH4 Skeletal Mechanism

Bane · October 18, 2012, 13:04

Greetings,

I would have a question concerning a methane-skeletal mechnism given in one of the tutorials.

The tutorial's name is "PDF Transport Simulation of Sandia Flame". Here a 16 species, 41 reaction mechanism for non-premixed methane combustion is used.

This mechanism apparently performs well (compared to GriMech 3), but all validations I found were under atmospheric conditions*. Yet my application in slightly pressurized (3.4bar).

So here comes the question: Has anybody used this mechanism under pressurized conditions and could possibly validate its behaviour?

Thanks in advance.

Best regards,

Bane

*The model seems to be based upon "Numerical modeling of turbulent natural-gas diffusion flames" by Peeters.

xiaobu178 · January 18, 2016, 10:39

Hello,Could you send me the CH4 Skeletal mechanisms for me ,I found it for a long time,Thank you!My mail is xiaobulhj@126.com!thank you so much!

October 18, 2012, 13:04	CH4 Skeletal Mechanism	#1
Bane New Member Join Date: Jul 2012 Posts: 3 Rep Power: 13	Greetings, I would have a question concerning a methane-skeletal mechnism given in one of the tutorials. The tutorial's name is "PDF Transport Simulation of Sandia Flame". Here a 16 species, 41 reaction mechanism for non-premixed methane combustion is used. This mechanism apparently performs well (compared to GriMech 3), but all validations I found were under atmospheric conditions. Yet my application in slightly pressurized (3.4bar). So here comes the question: Has anybody used this mechanism under pressurized conditions and could possibly validate its behaviour? Thanks in advance. Best regards, Bane The model seems to be based upon "Numerical modeling of turbulent natural-gas diffusion flames" by Peeters. sivakumar1729 likes this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Utilise reduced kinetics mechanism (ARM19 etc.)	clarkie_49	FLUENT	7	September 11, 2019 15:06
Setting up reaction parameters for a 3-step oxidation mechanism of C3H8	jose_rodrig	OpenFOAM	3	February 4, 2014 13:25
Chemkin mechanism import of surface chemistry	Claud	FLUENT	2	August 5, 2013 08:03
Reduced mechanism for Ethylene Combustion	Chaitanya	FLUENT	1	May 9, 2011 06:40
unit conversion of pre-exponential factor A of chemkin mechanism in Fluent	newbie	FLUENT	5	November 14, 2010 05:44

January 18, 2016, 10:39		#2
xiaobu178 New Member Jack Join Date: Jan 2016 Posts: 1 Rep Power: 0	Hello,Could you send me the CH4 Skeletal mechanisms for me ,I found it for a long time,Thank you!My mail is xiaobulhj@126.com!thank you so much!