CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Injections

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 29, 2012, 15:38
Default Injections
  #1
Member
 
Join Date: Sep 2012
Posts: 40
Rep Power: 4
S1m0n1 is on a distinguished road
I am trying to inject small particles of carbon into a 2D room. I have two inlets, both in the bottom left of the rectangle and the outlets are on the top and right side. One is on the bottom and one is on the side. I set the particle to carbon with a diameter of 1m. When I do this, shouldn't I be able to see the particles drop to the bottom because of how big they are? When I change the particle size from 1m to 1e-09m, they both follow the same trajectory. In reality, the big particle should fall to the floor while the small one would follow the flow of air and I'm not sure why I am unable to see this happening.


When I plot the particle and fluid I plot the velocity stream function to see the paths and they both follow one another. For my injection, I chose carbon to be inert and release from both inlets. I checked scale flow rate by face area and inject using face normal direction.


Sorry if this is a bit confusing. Any advice would be greatly appreciated. Thanks.
S1m0n1 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Injections in cyclone with DPM arjun3020 FLUENT 7 October 30, 2014 22:01
DPM Injections ABK FLUENT 14 August 26, 2013 02:40
Defining DPM Particle Injections with a UDF TedBrogan FLUENT 0 April 18, 2011 16:45
Coal Injections problem Carlo FLUENT 0 September 30, 2009 06:15
DPM injection ritmat FLUENT 6 June 26, 2007 02:38


All times are GMT -4. The time now is 23:11.