CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Default interior breakdown recongnization (http://www.cfd-online.com/Forums/fluent/108859-default-interior-breakdown-recongnization.html)

rmojgani November 2, 2012 16:40

Default interior breakdown recongnization
 
Hi everybody,
I import a 3D gambit mesh into fluent (Ansys 13.0 if matters), and the default interior is automatically broken into parts, for example
default interior
default interior::11
default interior::12

I want to detect which one is which and where are their positions. Displaying would be enough, but it is not as easy as 2D mesh, the pc crushes in other words!
can anyone help? thanks

Far November 2, 2012 17:20

First you must investigative why it is being divided into three regions. One of the reason is that you don't have mesh in any small portion.

rmojgani November 3, 2012 12:09

No, this is not a problem, and I need that interiors get separated, as I want to rotate one, my problem is that I cannot recognize which part is the one I want to rotate.

Far November 3, 2012 12:49

display the default interior in mesh panel and you will know which one to rotate.

rmojgani November 3, 2012 12:57

My problem is as my case is 3D, when I want to display>mesh the interior , the pc doesn't respond.

Far November 3, 2012 13:08

Name the interior in meshing software e.g. rotating, stationary1, stationary2. Which meshing software you are using?


All times are GMT -4. The time now is 16:05.