[627680136]

Hi,everybody,I am unexperienced in fluent.So I'd like to show you my problem and hope to receive some help...
I used the boundary function(profile) to define the rotor's movement.but the Rotor in initial time and 0.2 seconds after the state nothing to distinguish.Where's the problem here？
((rotor 3 point)
(time 0 1 60)
(omega_z 25.13 25.13 25.13))
http://user.qzone.qq.com/627680136/infocenter#!app=4&via=QZ.HashRefresh