|
[Sponsors] |
November 14, 2012, 21:16 |
surface tracking and rotor movement
|
#1 |
New Member
songjianxin
Join Date: Nov 2012
Posts: 4
Rep Power: 13 |
Hi,everybody,I am unexperienced in fluent.So I'd like to show you my problem and hope to receive some help...
I used the boundary function(profile) to define the rotor's movement.but the Rotor in initial time and 0.2 seconds after the state nothing to distinguish.Where's the problem here? ((rotor 3 point) (time 0 1 60) (omega_z 25.13 25.13 25.13)) http://user.qzone.qq.com/627680136/infocenter#!app=4&via=QZ.HashRefresh |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|