|November 29, 2012, 16:37||
Problem in obtaining final results
Join Date: Oct 2012
Location: IIT-Hyderabad, India
Posts: 42Rep Power: 5
I am a beginner in FLUENT, i am struck in obtaining results.
I am simulating 3d microchannel in fluent, i have obtained the results (contours, vectors) but am struck in following :
1. I am able to obtain vector fields but not able to obtain their contours. nor i am able to obtain velocity magnitude in any direction.( it says velocity in x/y/z direction is 0, but in vectors i am getting parabolic profile for flow and the values also).
2. how do i obtain Nusselt number/h/q along the z direction(longitudnal direction). (please see the figure attached for further details).
Any kind of hint is appreciated.....
|November 30, 2012, 10:39||
Join Date: Nov 2011
Posts: 25Rep Power: 6
1-I think your problem is that you are plotting the contours on the wall (that means 0 velocity), what you should do is define a middle plane (surface>>Plane), and then plot the contours of velocity on this plane.
2- The nusselt number is in contour of >> wall fluxes>> surface nusselt number
I hope it will help you
|fluent, microchannel, post processing, velocity profile|
|Thread||Thread Starter||Forum||Replies||Last Post|
|pisoFoam with k-epsilon turb blows up - Some questions||Heroic||OpenFOAM Running, Solving & CFD||26||December 17, 2012 04:34|
|AMI speed performance||danny123||OpenFOAM||19||October 24, 2012 07:44|
|High Courant Number @ icoFoam||Artex85||OpenFOAM Running, Solving & CFD||9||January 3, 2012 09:06|
|Forces in OF15||richard||OpenFOAM Running, Solving & CFD||166||September 17, 2011 03:24|
|Computational time||sunnysun||OpenFOAM Running, Solving & CFD||5||March 16, 2009 04:32|