CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Iteration Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 7, 2012, 13:01
Default Iteration Problem
  #1
New Member
 
Jason
Join Date: Dec 2012
Posts: 1
Rep Power: 0
TrojanHorse is on a distinguished road
I am currently running a simulation checking on the fluid flow over an airfoil. As usual, import mesh, setup all necessary condition, initialize the iterations and run calculations. However, every line of iterations came out this message shown below:

cx-xy-plot-data: unequal length argument list.

What could possibly lead to this problem?
TrojanHorse is offline   Reply With Quote

Old   April 1, 2015, 01:13
Default cx-xy-plot data: unequal length argument lists
  #2
New Member
 
Bharatesh
Join Date: Mar 2015
Posts: 26
Rep Power: 2
bharatesh is on a distinguished road
Hey guys,

I have a wing-pylon-store .cas file. When I import it into Ansys 14.0, and after giving necessary problem set ups etc tried to solve the file.I'm getting the below error after every iterations..
cx-xy-plot data: unequal length argument lists

Doing 'Green Gauss Cell Based calculation,
I have calculated the Reference values (Wing's Area and Length in particular).

Can somebody help me!

@Jason, please let me know if you have resolved the issue..

Last edited by bharatesh; April 1, 2015 at 01:17. Reason: Missed to include some information.
bharatesh is offline   Reply With Quote

Old   April 15, 2015, 05:40
Exclamation Error while Iterating.
  #3
Senior Member
 
Join Date: Mar 2013
Location: B'lr
Posts: 115
Rep Power: 4
shivakumar is on a distinguished road
I'm also getting the same error when the iteration starts.

cx-xy-plot-data: unequal length argument list.

What does it mean?

Any help would be appreciated

Thanks
shiv
shivakumar is offline   Reply With Quote

Reply

Tags
cx-xy-plot-data

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to increase "Newton Pressure Iteration Limit" kus CFX 9 April 21, 2013 01:54
a problem of nozzle simulation xck1986 OpenFOAM 11 November 27, 2012 09:22
Can I solve this problem by Fluent? Kai_kc FLUENT 1 October 27, 2010 05:29
The problem of inner iteration when calling the subroutine guoxj CFX 18 October 23, 2010 20:37
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 19:13


All times are GMT -4. The time now is 23:34.