CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Animation of Fluent transient data (http://www.cfd-online.com/Forums/fluent/110617-animation-fluent-transient-data.html)

saisanthoshm88 December 16, 2012 06:43

Animation of Fluent transient data
 
I need to create an animation out of a transient solution data from Fluent.

There are many transient files to be considered to produce the animation.

If I create a solution animation in the calculation activities I wonder if the simulation would take long as the animation commands need to be executed at many time steps as is the requirement in my case.

Isn't there a way to produce such animation after the simulation is finished.

Taking a snapshot of each transient file data is not possible as there are many.

I tried to use CFD Post but fluent transient data is not supported in it's time step selector.

Could some one please suggest a better way of doing this

akshaymanikjade December 16, 2012 09:00

Do use tecplot360 its very easy and possible what you thinking now.
let me know if you want help in this regard.
Try to load case and dat file from fluent data loader in tecplot and generate simulation simply.It is as simple as telling you.:)

beer December 18, 2012 10:51

Sure you can use CFD Post. You have to write backup-files every time step. When you load in the last backup-file of your simulation, you can use the transient solutions like you do with CFX. This works only with the transient solver.


All times are GMT -4. The time now is 10:39.