Modeling Particles Deposition on Porous Surface

bahman · December 19, 2012, 03:43

Hello all friends
I want to modeling a solid-liquid two-phase flow (granular flow) with porous media for investigation deposition of solid particles on porous surface and filter cake formation using Fluent, But when i do it,solid particles penetrate into the porous media.
Please, if anyone has worked in this field guide me.
Thanks

Vaelyn · June 14, 2019, 15:16

One solution is to atributte a high resistance for the solid phase in the porous zone setup window (1e+25 for both inertial and viscous resistances, for example). It may or may not work depending on the pressure input or if there is a mass flow condition for the solid phase on the outlet.

December 19, 2012, 03:43	Modeling Particles Deposition on Porous Surface	#1
bahman New Member Join Date: Dec 2012 Posts: 5 Rep Power: 13	Hello all friends I want to modeling a solid-liquid two-phase flow (granular flow) with porous media for investigation deposition of solid particles on porous surface and filter cake formation using Fluent, But when i do it,solid particles penetrate into the porous media. Please, if anyone has worked in this field guide me. Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to model granular flow through porous media	Axius	FLUENT	2	August 7, 2014 10:34
Distribution of deposition of particles	shay	STAR-CCM+	1	November 8, 2010 00:31
CFX4.3 -build analysis form	Chie Min	CFX	5	July 12, 2001 23:19
Distribution of particles around porous media	CHUBBY	FLUENT	1	April 30, 2001 16:26
Modeling Free Surface Flows	Elliot Schwartz	Main CFD Forum	5	August 25, 1998 21:03

June 14, 2019, 15:16		#2
Vaelyn New Member Join Date: Sep 2018 Posts: 16 Rep Power: 7	One solution is to atributte a high resistance for the solid phase in the porous zone setup window (1e+25 for both inertial and viscous resistances, for example). It may or may not work depending on the pressure input or if there is a mass flow condition for the solid phase on the outlet.