CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

euler-euler for wind blown sand flow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 19, 2012, 10:21
Default euler-euler for wind blown sand flow
  #1
New Member
 
Pacheo
Join Date: Apr 2009
Posts: 7
Rep Power: 8
pacheo is on a distinguished road
hi bros,

I adopt euler-euler model to simulate wind blown sand flow. The primary phase is wind flow and the second phase is sand. Air blow into the tunnel to get the sand particles "started", which are included in the case file.

Some questions are listed as follows

1 in the "cell zone conditions" tab, how to assign the two different phases? Could they be assigned different phase separately or only set as mixture?

2 in the "boundary conditions" tab, how to assign the two parts as different phases?

3 in the "boundary conditions" tab, which type of boundary condition fit for the interface of the "sand" and "air"?

Thank u guys~~

here is the case link. virus free

http://www.sendspace.com/file/21ukjq
pacheo is offline   Reply With Quote

Old   December 19, 2012, 12:00
Default
  #2
Member
 
Osamah Ali Al-Hashimi
Join Date: Jul 2012
Posts: 44
Rep Power: 5
Al-Hashimi is on a distinguished road
Hi,

I doing some thing similar to your work but water sand ... can we cooperate for beter results? i need some one to discuss with about my issue and sure you need also.
my email is ausama_ali27@yahoo.com
Al-Hashimi is offline   Reply With Quote

Old   December 19, 2012, 13:03
Default
  #3
Member
 
Osamah Ali Al-Hashimi
Join Date: Jul 2012
Posts: 44
Rep Power: 5
Al-Hashimi is on a distinguished road
Your file is not openable.

This message appaers
"Warning: An error or interrupt occurred while reading the journal file.
Some commands may not have been completed."
Al-Hashimi is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 21:06.