[ICEM] How to do 2D hybrid mesh around hydrofoil

jaber · January 3, 2013, 12:19

Hello all,
I am simulating a viscous flow around a 2D NACA hydrofoil with a rectangular domain (using FLUENT) especially in (static) stall conditions. Then have to introduce a large angle of attack (from 0 to 40 degre). According to literature, I have to do an hybrid mesh: structured (quadri) mesh on boundary layer around the hydrofoil and even near the top and bottom walls, and unstructured (tri) mesh on the rest of the domain.
Few times ago, I have successfully done a similar model but without introducing angle of attack, within ICEMCFD hexa blocking. Which I have to abandon now. Unfortunately I haven't found any example or help concerning 2d hybrid mesh on ICEMCFD tutorial. Then I have searched on CFD-online forum. I am trying with "Bigio 1st approach":Hybrid mesh for 2D boundary layer . But I get difficulties ignoring details on this approach. And I don’t know if it can give good mesh? Time is running and I have to finish my project in the shortest time.
Please, could anyone give me help about this approach or other manner to do the 2d hybrid mesh?
Any suggestion will be appreciate.
Thanks in advance.

jaber · January 3, 2013, 12:33

Sorry here is the link:"Bigio 1st approach":http://www.cfd-online.com/Forums/ans...ary-layer.html

January 3, 2013, 12:19	[ICEM] How to do 2D hybrid mesh around hydrofoil	#1
jaber New Member Join Date: Apr 2009 Posts: 18 Rep Power: 17	Hello all, I am simulating a viscous flow around a 2D NACA hydrofoil with a rectangular domain (using FLUENT) especially in (static) stall conditions. Then have to introduce a large angle of attack (from 0 to 40 degre). According to literature, I have to do an hybrid mesh: structured (quadri) mesh on boundary layer around the hydrofoil and even near the top and bottom walls, and unstructured (tri) mesh on the rest of the domain. Few times ago, I have successfully done a similar model but without introducing angle of attack, within ICEMCFD hexa blocking. Which I have to abandon now. Unfortunately I haven't found any example or help concerning 2d hybrid mesh on ICEMCFD tutorial. Then I have searched on CFD-online forum. I am trying with "Bigio 1st approach":Hybrid mesh for 2D boundary layer . But I get difficulties ignoring details on this approach. And I don’t know if it can give good mesh? Time is running and I have to finish my project in the shortest time. Please, could anyone give me help about this approach or other manner to do the 2d hybrid mesh? Any suggestion will be appreciate. Thanks in advance.

January 3, 2013, 12:33	[ICEM] How to do 2D hybrid mesh around hydrofoil	#2
jaber New Member Join Date: Apr 2009 Posts: 18 Rep Power: 17	Sorry here is the link:"Bigio 1st approach":http://www.cfd-online.com/Forums/ans...ary-layer.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gambit problems	Althea	FLUENT	22	January 4, 2017 03:19
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
[ICEM] Octree surface mesh issue	siw	ANSYS Meshing & Geometry	6	February 13, 2011 12:46
[Other] hexa vs hybrid mesh convergence	Viais	OpenFOAM Meshing & Mesh Conversion	0	April 23, 2010 10:39
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 18:10